Login Form






Lost Password?
No account yet? Register (FREE)

Search Backup Central

Twitter Updates

Twitter Updates

    follow me on Twitter

    Disclaimer

    The opinions contained within this website, it's blog(s), forums, and Wikis, are those of the original poster and do not represent the position of my (or any other) employer.
    Avamar does dedupe to tape PDF Print E-mail
    Written by W. Curtis Preston   
    Friday, 29 January 2010
    Up until today I thought that CommVault was the only backup product that was storing deduped data to tape.  It turns out the Avamar now does it too.

    The weird thing is that this little tidbit was put way down at the end of a press release that didn't mention it in its title.  Read that press release.  I did when it came out.  But I didn't notice this tiny little sentence at the end:

    "Finally, EMC has increased Avamar backup capacity by more than 60 percent and added new deduplicated export to tape functionality."

    For a product that has maintained a "we don't need no stinking tape" stance for quite a while now, I think this is bigger news than a single sentence at the end of a long press release.  I already made my peace with dedupe to tape, as long as it's used in the right way -- as long term storage, not for operational recovery.

    So I'm glad to see that Avamar also has this functionality as well.  And kudos to Scott Waterhouse for pointing out my miss and telling me on Twitter.
    Comments
    Search RSS
    Philip Leighton   |2010-01-30 07:10:08
    I read a blog post about this last night (and cant remember where!) so I went looking for some info this morning. There are a few documents up on Powerlink under Avamar Data Transport regarding requirements and installation. It looks like its not a light undertaking :

    The Avamar Data Transport system supports Avamar Servers running versions
    4.1.0, 4.1.1, 4.1.2., or 5.0. The Avamar Data Transport nodes are highly customized versions of Avamar Virtual Edition 4.1.2.

    Avamar Data Transport requires VMware ESX 3.5 update 4 or ESX 4.0.0

    The Avamar Data Transport application uses one of two backup software products
    to transport data to tape: EMC NetWorkerŽ and Symantec NetBackup.For optimal efficiency it is strongly recommended that one tape drive per transport


    ESX requirements look to be pretty hefty, for example, to deploy an Avamar Data Transport system (one control node and with two transport nodes as per basic recommendation), ensure that the ESX server has at least 10 GB of memory, 2 * Quad Core processors and at least 5 TB of disk space available for virtual machines. Its also strongly recommended that the ESX server is dedicated to this task.

    For 4 transport nodes (the maximum) then your ESX server needs 4 quad core procs with a minimum of 34GB ram and 9 TB disk.....

    Obviously on top of this you need a backup server and tape library (with one drive per transport node recommended).
    Philip Leighton  - Blog   |2010-01-30 07:19:27
    Typical - just found the blog entry for this, its from

    http://whughgriffin.wordpress.com/2010/01/28/avamar-tape-out-using-data-transport/
    Only registered users can write comments!

    3.26 Copyright (C) 2008 Compojoom.com / Copyright (C) 2007 Alain Georgette / Copyright (C) 2006 Frantisek Hliva. All rights reserved."

     
    < Prev   Next >

    Sponsored Links