Welcome! » Log In » Create A New Profile

Commvault- Data Aging stucks at 93%

Posted by kaps46 
Commvault- Data Aging stucks at 93%
October 30, 2012 06:00AM
Hi,

Commvault version 8.
We ran the Data Aging job again and it got stucked at 93%. Job came to Pending state. Resumed the Job again and now it was stucked at 13%.

We have checked the Readiness of the commserver. Its ready.
Telnet to mediaagent is also good.

We checked the Eventviewer and noticed this event :
Processes for job[183647] were forcefully terminated. Event code : 19:1041

In Logs for this Job under DataAging section, it shows that there is no AGED data that can be used for this Data Aging Job. To verify this, we ran the Media Retention report and confirmed that there was actually Nothing that could be used for this Job.

Now the main issue is that Job should complete with appropriate logs and messages rather than getting stucked at 93%.

The only error I noticed in log file is :

Data aging.log :
3100 7c8 10/29 12:01:18 183647 ** CVSession::sendBytes(...) iSocketMember=956 send failed, err=[1][10093][Either the application has not called WSAStartup, or WSAStartup failed.].
3100 7c8 10/29 12:01:18 183647 ** CVSession::sendMessageInt(...):
3100 7c8 10/29 12:01:18 183647 ** CVSession::disconnect (void)

Jobmanager.log
7968 21c 10/29 12:01:57 183647 Servant Control Response [Terminated] received from [lbsth-backup02.lbsouthwark.ad.southwark.gov.uk]
7968 138 10/29 12:01:57 183647 Service -> ABNORMALLY TERMINATED JOB [183647] <-- Detected as part of a [IsAlive] operation.
7968 ad8 10/29 12:01:57 183647 Scheduler Set pending cause [Loss of control process archPrune.exe. Possible causes]::Client [Comcell server] Application [JobManager] Message Id [318767703] RCID [0] ReservationId [0]. Level [0] flags [0] id [0] overwrite [0] append [0] CustId[0].
7968 1ffc 10/29 12:01:57 183647 Scheduler Phase [Failed] message received from [Job Manager] Module [JobManager] Token [183647] restartPhase [0]

Any help for this issue would be highly appreciated.

- Kaps
Commvault- Data Aging stucks at 93%
November 08, 2016 03:30AM
Hi Kaps,

Have you tried stopping and starting the CommVault services, using the Service Control Manager? Try this on the MediaAgent.

When was the last time you recycled the servers?
Sorry, only registered users may post in this forum.

Click here to login