Welcome! » Log In » Create A New Profile

Backup fails after update to 9.0.0

Posted by Uwe Schuerkamp 
Uwe Schuerkamp
Backup fails after update to 9.0.0
July 17, 2017 02:59AM
Hi folks,

I recently updated our four bacula servers to 9.0.0. Everything went
rather smoothly except for one job which now fails with the following
error message.

17-Jul 11:35 deniolXXXXX-dir JobId 0: Fatal error: bsock.c:569 Packet
size=1073741835 too big from "Client: YYYY-fd:YYYY:9102. Terminating connection.

I've compiled 9.0.0 from source (CentOS 6 running on all servers).

Any idea what could be causing this? Many thanks in advance for your
comments & suggestions,

Uwe



--
Uwe Schürkamp | email: <uwe.schuerkamp@nionex.net>
Arvato Systems S4M GmbH | Sitz Köln | Amtsgericht Köln HRB 27038







------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
This message was imported via the External PhorumMail Module
Re: Backup fails after update to 9.0.0
July 17, 2017 03:59AM
Hello Uwe,

My best guess is that for some reason, your Director may not have lz4
properly built, so it does not support the new Bacula comm line
compression, and on the client that failed, it is doing comm line
compression. That is typically with version 9.0 what leads to the
packet size being too big. One way to test this is to explicitly set:

CommCompression = no

In your Client resource.

You can also try setting the same directive in the bacula-dir.conf for
the Director resource.

If you still have problems, I would like to see exactly what Bacula
version, hardware (32bit/64bit, CPU architecture, ...), and OS the
client is running.

Best regards,

Kern


On 07/17/2017 11:38 AM, Uwe Schuerkamp wrote:
> Hi folks,
>
> I recently updated our four bacula servers to 9.0.0. Everything went
> rather smoothly except for one job which now fails with the following
> error message.
>
> 17-Jul 11:35 deniolXXXXX-dir JobId 0: Fatal error: bsock.c:569 Packet
> size=1073741835 too big from "Client: YYYY-fd:YYYY:9102. Terminating connection.
>
> I've compiled 9.0.0 from source (CentOS 6 running on all servers).
>
> Any idea what could be causing this? Many thanks in advance for your
> comments & suggestions,
>
> Uwe
>
>
>


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
This message was imported via the External PhorumMail Module
Sorry, only registered users may post in this forum.

Click here to login