Welcome! » Log In » Create A New Profile

NDMP backup over LAN.

Posted by Bo Nielsen 
Bo Nielsen
NDMP backup over LAN.
December 20, 2017 01:59AM
I need to backup an Isilon storage system over LAN, since there are approx. 40 km between TSM server and Storage system. I have created its own domain for this backup, with its own storage pool.
I have defined a node and a datamover with type = NAS.

When I start a backup:
backup node dcc-isilon01 / ifs toc = no mode = full

I get this error:

12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started in the
BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01, file
system / ifs, started as process 155 by administrator
BOANIE. (SESSION: 78516, PROCESS: 155)
12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is reporting NDMP
error number 23: A data connection could not be
established. (SESSION: 78516, PROCESS: 155)
12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed to
open an NDMP data connection to the TSM tape server.
Please verify that the file server is capable of
outbound data connections. (SESSION: 78516, PROCESS:
155)
12/06/2017 08:52:21 ANR4728E Server connection to file server DCC-ISILON01
failed. Please check the attributes of the file server
specified during definition of the data transfer. (SESSION:
78516, PROCESS: 155)
12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155 terminated
- storage media inaccessible. (SESSION: 78516, PROCESS:
155)
12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running in the
BACKGROUND completed with completion state FAILURE at
8:52:21. (SESSION: 78516, PROCESS: 155)
12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL) completed with
a completion state of FAILURE. (SESSION: 78516, PROCESS:
155)

Errors from the Filer:

2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx port:60817 - Operation timed out
2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:952:ndmpdDataConnect_v4 Could not connect to server
2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT

All ports between Filer and TSM are open. Firewall on windows server hosting TSM is disabled.

Regards

Bo Nielsen


IT Service



Technical University of Denmark

IT Service

Frederiksborgvej 399

Building 109

DK - 4000 Roskilde

Denmark

Mobil +45 2337 0271

boanie@dtu.dk<mailto:boanie@dtu.dk>
This message was imported via the External PhorumMail Module
Shawn Drew
Re: NDMP backup over LAN.
December 20, 2017 08:59AM
Over the LAN needs a Native type destination storagepool. Can you confirm the storagepool data format?

Thanks,
-Shawn

On Dec 20, 2017, 4:42 AM -0500, Bo Nielsen <boanie@dtu.dk>, wrote:
> I need to backup an Isilon storage system over LAN, since there are approx. 40 km between TSM server and Storage system. I have created its own domain for this backup, with its own storage pool.
> I have defined a node and a datamover with type = NAS.
>
> When I start a backup:
> backup node dcc-isilon01 / ifs toc = no mode = full
>
> I get this error:
>
> 12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started in the
> BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01, file
> system / ifs, started as process 155 by administrator
> BOANIE. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is reporting NDMP
> error number 23: A data connection could not be
> established. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed to
> open an NDMP data connection to the TSM tape server.
> Please verify that the file server is capable of
> outbound data connections. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR4728E Server connection to file server DCC-ISILON01
> failed. Please check the attributes of the file server
> specified during definition of the data transfer. (SESSION:
> 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155 terminated
> - storage media inaccessible. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running in the
> BACKGROUND completed with completion state FAILURE at
> 8:52:21. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL) completed with
> a completion state of FAILURE. (SESSION: 78516, PROCESS:
> 155)
>
> Errors from the Filer:
>
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx port:60817 - Operation timed out
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:952:ndmpdDataConnect_v4 Could not connect to server
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT
>
> All ports between Filer and TSM are open. Firewall on windows server hosting TSM is disabled.
>
> Regards
>
> Bo Nielsen
>
>
> IT Service
>
>
>
> Technical University of Denmark
>
> IT Service
>
> Frederiksborgvej 399
>
> Building 109
>
> DK - 4000 Roskilde
>
> Denmark
>
> Mobil +45 2337 0271
>
> boanie@dtu.dk<mailto:boanie@dtu.dk
This message was imported via the External PhorumMail Module
Bo Nielsen
Re: NDMP backup over LAN.
December 20, 2017 11:59PM
Hi Shawn,

The Storage pool data format is Native:
Storage Pool Data Format: Native

Regards

Bo

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Shawn Drew
Sent: 20. december 2017 17:41
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] NDMP backup over LAN.

Over the LAN needs a Native type destination storagepool. Can you confirm the storagepool data format?

Thanks,
-Shawn

On Dec 20, 2017, 4:42 AM -0500, Bo Nielsen <boanie@dtu.dk>, wrote:
> I need to backup an Isilon storage system over LAN, since there are approx. 40 km between TSM server and Storage system. I have created its own domain for this backup, with its own storage pool.
> I have defined a node and a datamover with type = NAS.
>
> When I start a backup:
> backup node dcc-isilon01 / ifs toc = no mode = full
>
> I get this error:
>
> 12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started
> in the BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01,
> file system / ifs, started as process 155 by administrator BOANIE.
> (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is
> reporting NDMP error number 23: A data connection could not be
> established. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed
> to open an NDMP data connection to the TSM tape server.
> Please verify that the file server is capable of outbound data
> connections. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR4728E Server connection to file server
> DCC-ISILON01 failed. Please check the attributes of the file server
> specified during definition of the data transfer. (SESSION:
> 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155
> terminated
> - storage media inaccessible. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running
> in the BACKGROUND completed with completion state FAILURE at 8:52:21.
> (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL)
> completed with a completion state of FAILURE. (SESSION: 78516, PROCESS:
> 155)
>
> Errors from the Filer:
>
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP
> data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP
> data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
> data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx
> port:60817 - Operation timed out
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
> data.c:952:ndmpdDataConnect_v4 Could not connect to server
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
> data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT
>
> All ports between Filer and TSM are open. Firewall on windows server hosting TSM is disabled.
>
> Regards
>
> Bo Nielsen
>
>
> IT Service
>
>
>
> Technical University of Denmark
>
> IT Service
>
> Frederiksborgvej 399
>
> Building 109
>
> DK - 4000 Roskilde
>
> Denmark
>
> Mobil +45 2337 0271
>
> boanie@dtu.dk<mailto:boanie@dtu.dk
This message was imported via the External PhorumMail Module
Efim
Re: NDMP backup over LAN.
December 21, 2017 02:59AM
Hi,
by default SP uses 10000 port (server option NDMPControlport) on NAS for communicate.
Check which port is configured on the NAS.
When you define datamover do you use correct user and password for NDMP operations on NAS?
Efim



> 21 дек. 2017 г., в 10:46, Bo Nielsen <boanie@DTU.DK> написал(а):
>
> Hi Shawn,
>
> The Storage pool data format is Native:
> Storage Pool Data Format: Native
>
> Regards
>
> Bo
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Shawn Drew
> Sent: 20. december 2017 17:41
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] NDMP backup over LAN.
>
> Over the LAN needs a Native type destination storagepool. Can you confirm the storagepool data format?
>
> Thanks,
> -Shawn
>
> On Dec 20, 2017, 4:42 AM -0500, Bo Nielsen <boanie@dtu.dk>, wrote:
>> I need to backup an Isilon storage system over LAN, since there are approx. 40 km between TSM server and Storage system. I have created its own domain for this backup, with its own storage pool.
>> I have defined a node and a datamover with type = NAS.
>>
>> When I start a backup:
>> backup node dcc-isilon01 / ifs toc = no mode = full
>>
>> I get this error:
>>
>> 12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started
>> in the BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01,
>> file system / ifs, started as process 155 by administrator BOANIE.
>> (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is
>> reporting NDMP error number 23: A data connection could not be
>> established. (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed
>> to open an NDMP data connection to the TSM tape server.
>> Please verify that the file server is capable of outbound data
>> connections. (SESSION: 78516, PROCESS:
>> 155)
>> 12/06/2017 08:52:21 ANR4728E Server connection to file server
>> DCC-ISILON01 failed. Please check the attributes of the file server
>> specified during definition of the data transfer. (SESSION:
>> 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155
>> terminated
>> - storage media inaccessible. (SESSION: 78516, PROCESS:
>> 155)
>> 12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running
>> in the BACKGROUND completed with completion state FAILURE at 8:52:21.
>> (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL)
>> completed with a completion state of FAILURE. (SESSION: 78516, PROCESS:
>> 155)
>>
>> Errors from the Filer:
>>
>> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP
>> data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
>> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP
>> data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
>> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
>> data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx
>> port:60817 - Operation timed out
>> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
>> data.c:952:ndmpdDataConnect_v4 Could not connect to server
>> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
>> data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT
>>
>> All ports between Filer and TSM are open. Firewall on windows server hosting TSM is disabled.
>>
>> Regards
>>
>> Bo Nielsen
>>
>>
>> IT Service
>>
>>
>>
>> Technical University of Denmark
>>
>> IT Service
>>
>> Frederiksborgvej 399
>>
>> Building 109
>>
>> DK - 4000 Roskilde
>>
>> Denmark
>>
>> Mobil +45 2337 0271
>>
>> boanie@dtu.dk<mailto:boanie@dtu.dk
This message was imported via the External PhorumMail Module
Remco Post
Re: NDMP backup over LAN.
December 21, 2017 03:59AM
you say that there are no firewall restrictions, and I believe you. But, the port number used is quite high. There is a setting, ndmpportrange for the TSM server. We noticed that setting that to 10000,10010 did help, despite the lack of firewalls.

> Op 20 dec. 2017, om 10:32 heeft Bo Nielsen <boanie@DTU.DK> het volgende geschreven:
>
> I need to backup an Isilon storage system over LAN, since there are approx. 40 km between TSM server and Storage system. I have created its own domain for this backup, with its own storage pool.
> I have defined a node and a datamover with type = NAS.
>
> When I start a backup:
> backup node dcc-isilon01 / ifs toc = no mode = full
>
> I get this error:
>
> 12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started in the
> BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01, file
> system / ifs, started as process 155 by administrator
> BOANIE. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is reporting NDMP
> error number 23: A data connection could not be
> established. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed to
> open an NDMP data connection to the TSM tape server.
> Please verify that the file server is capable of
> outbound data connections. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR4728E Server connection to file server DCC-ISILON01
> failed. Please check the attributes of the file server
> specified during definition of the data transfer. (SESSION:
> 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155 terminated
> - storage media inaccessible. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running in the
> BACKGROUND completed with completion state FAILURE at
> 8:52:21. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL) completed with
> a completion state of FAILURE. (SESSION: 78516, PROCESS:
> 155)
>
> Errors from the Filer:
>
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx port:60817 - Operation timed out
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:952:ndmpdDataConnect_v4 Could not connect to server
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT
>
> All ports between Filer and TSM are open. Firewall on windows server hosting TSM is disabled.
>
> Regards
>
> Bo Nielsen
>
>
> IT Service
>
>
>
> Technical University of Denmark
>
> IT Service
>
> Frederiksborgvej 399
>
> Building 109
>
> DK - 4000 Roskilde
>
> Denmark
>
> Mobil +45 2337 0271
>
> boanie@dtu.dk<mailto:boanie@dtu.dk>



73 de Remco Post, PE1PIP
This message was imported via the External PhorumMail Module
Bo Nielsen
Re: NDMP backup over LAN.
December 21, 2017 04:59AM
Hi Remco and Efim,

I set the TSM option ndmpportrange 10000,10010, but no success.

User and password is correct.

/Bo

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Remco Post
Sent: 21. december 2017 12:04
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] NDMP backup over LAN.

you say that there are no firewall restrictions, and I believe you. But, the port number used is quite high. There is a setting, ndmpportrange for the TSM server. We noticed that setting that to 10000,10010 did help, despite the lack of firewalls.

> Op 20 dec. 2017, om 10:32 heeft Bo Nielsen <boanie@DTU.DK> het volgende geschreven:
>
> I need to backup an Isilon storage system over LAN, since there are approx. 40 km between TSM server and Storage system. I have created its own domain for this backup, with its own storage pool.
> I have defined a node and a datamover with type = NAS.
>
> When I start a backup:
> backup node dcc-isilon01 / ifs toc = no mode = full
>
> I get this error:
>
> 12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started in the
> BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01, file
> system / ifs, started as process 155 by administrator
> BOANIE. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is reporting NDMP
> error number 23: A data connection could not be
> established. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed to
> open an NDMP data connection to the TSM tape server.
> Please verify that the file server is capable of
> outbound data connections. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR4728E Server connection to file server DCC-ISILON01
> failed. Please check the attributes of the file server
> specified during definition of the data transfer. (SESSION:
> 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155 terminated
> - storage media inaccessible. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running in the
> BACKGROUND completed with completion state FAILURE at
> 8:52:21. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL) completed with
> a completion state of FAILURE. (SESSION: 78516, PROCESS:
> 155)
>
> Errors from the Filer:
>
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx port:60817 - Operation timed out
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:952:ndmpdDataConnect_v4 Could not connect to server
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT
>
> All ports between Filer and TSM are open. Firewall on windows server hosting TSM is disabled.
>
> Regards
>
> Bo Nielsen
>
>
> IT Service
>
>
>
> Technical University of Denmark
>
> IT Service
>
> Frederiksborgvej 399
>
> Building 109
>
> DK - 4000 Roskilde
>
> Denmark
>
> Mobil +45 2337 0271
>
> boanie@dtu.dk<mailto:boanie@dtu.dk>



73 de Remco Post, PE1PIP
This message was imported via the External PhorumMail Module
Efim
Re: NDMP backup over LAN.
December 21, 2017 04:59AM
no, I think you don't understand me.

Connection from TSM to NAS - NDMPControlport
Connections from NAS to TSM - ndmpportrange

Usually configuration looks like this:

NDMP control port:
TSM Servers (all) -> NAS: 10000
NAS -> TSM Servers: 1024-2024 (range)

Check port configured on NAS and sp server option NDMPControlport.

Efim



> 21 дек. 2017 г., в 15:03, Bo Nielsen <boanie@DTU.DK> написал(а):
>
> Hi Remco and Efim,
>
> I set the TSM option ndmpportrange 10000,10010, but no success.
>
> User and password is correct.
>
> /Bo
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Remco Post
> Sent: 21. december 2017 12:04
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] NDMP backup over LAN.
>
> you say that there are no firewall restrictions, and I believe you. But, the port number used is quite high. There is a setting, ndmpportrange for the TSM server. We noticed that setting that to 10000,10010 did help, despite the lack of firewalls.
>
>> Op 20 dec. 2017, om 10:32 heeft Bo Nielsen <boanie@DTU.DK> het volgende geschreven:
>>
>> I need to backup an Isilon storage system over LAN, since there are approx. 40 km between TSM server and Storage system. I have created its own domain for this backup, with its own storage pool.
>> I have defined a node and a datamover with type = NAS.
>>
>> When I start a backup:
>> backup node dcc-isilon01 / ifs toc = no mode = full
>>
>> I get this error:
>>
>> 12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started in the
>> BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01, file
>> system / ifs, started as process 155 by administrator
>> BOANIE. (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is reporting NDMP
>> error number 23: A data connection could not be
>> established. (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed to
>> open an NDMP data connection to the TSM tape server.
>> Please verify that the file server is capable of
>> outbound data connections. (SESSION: 78516, PROCESS:
>> 155)
>> 12/06/2017 08:52:21 ANR4728E Server connection to file server DCC-ISILON01
>> failed. Please check the attributes of the file server
>> specified during definition of the data transfer. (SESSION:
>> 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155 terminated
>> - storage media inaccessible. (SESSION: 78516, PROCESS:
>> 155)
>> 12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running in the
>> BACKGROUND completed with completion state FAILURE at
>> 8:52:21. (SESSION: 78516, PROCESS: 155)
>> 12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL) completed with
>> a completion state of FAILURE. (SESSION: 78516, PROCESS:
>> 155)
>>
>> Errors from the Filer:
>>
>> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
>> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
>> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx port:60817 - Operation timed out
>> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:952:ndmpdDataConnect_v4 Could not connect to server
>> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT
>>
>> All ports between Filer and TSM are open. Firewall on windows server hosting TSM is disabled.
>>
>> Regards
>>
>> Bo Nielsen
>>
>>
>> IT Service
>>
>>
>>
>> Technical University of Denmark
>>
>> IT Service
>>
>> Frederiksborgvej 399
>>
>> Building 109
>>
>> DK - 4000 Roskilde
>>
>> Denmark
>>
>> Mobil +45 2337 0271
>>
>> boanie@dtu.dk<mailto:boanie@dtu.dk>
>
> —
>
> 73 de Remco Post, PE1PIP
This message was imported via the External PhorumMail Module
Sorry, only registered users may post in this forum.

Click here to login