Welcome! » Log In » Create A New Profile

library/netbackup loses track of tapes after adding isilon n

Posted by Anonymous 
library/netbackup loses track of tapes after adding isilon n
September 04, 2013 03:32PM
Hi,

I've got an existing system that's been running reliably for several years; the clients are EMC Celerra NASes backing up via NDMP.

I'm running netbackup 7.0 (far as i can tell, no patches have been applied). Dell ML6000 library with 4 LTO4 drives. platform is win2008r2 SP1 on a dell server, R410 I think.

I've just added an Isilon NAS cluster to the mix, also via NDMP. I lose track of NDMP terminology, but the NASes all connect directly to the tape drives and the library via a very small FC SAN.

The Celerras still work. I am also able to back up and restore to/from the Isilon.

However, after the Isilon has mounted and used a tape, netbackup loses track of the tape. The tape is left in the drive, but netbackup reports that it has been removed from the library. If I go into the library directly, and move the tape from the drive to a slot, I can then tell netbackup to update its inventory and it finds the tape again.

I presumably should upgrade netbackup. Seems like the latest 7.1.x point release would be a nice conservative place to go; any reason to do anything else?

Any other thoughts before I engage support?
--
Dan Pritts
ICPSR Computing & Network Services
University of Michigan
+1 (734)615-7362
Sorry, you do not have permission to post/reply in this forum.