Welcome! » Log In » Create A New Profile

Pure Disk Pool Down -MSDP

Posted by Pranav 
Pure Disk Pool Down -MSDP
February 26, 2014 01:01AM
Hello Geeks !

Good Day !

I am stuck in one issue -we have a pure disk pool created on ZFS file system. I am well aware that symantec doesn't supports this.
Now this was working file till yesterday but since yesterday 09:00CST it has stopped working.

# ./crcontrol --dsstat
Error: -1: NetConnectByAddr: Failed to connect to host: Connection refused (146)
Error: -1: NetConnectByAddr: Failed to connect to spoold on port 10082 using the following interface(s): [ 127.0.0.1 ] (Connection refused) Ensure storage server services are running and operational. V-454-92
Error: 53: Could not establish a connection to 127.0.0.1:10082: connect failed (Connection refused)
Error : Connection failed connection actively refused. Note that the content router needs to be running to get a connection.

Error: 25067: Database: connection to database crdb at server:10085 failed (could not connect to server: Connection refused
Is the server running on host "server" and accepting
TCP/IP connections on port 10085?
)
Error: 25053: Database Manager: could not access storage database (connection actively refused).
Error: 25004: Failed to run database class
Error: 25004: Failed to read startup mode
Error: 26016: Symantec PureDisk Content Router: Initialize failure.

I need some help here ,what should I do ?

Thanks,
Pranavb
Pure Disk Pool Down -MSDP
February 26, 2014 01:19AM
This is what i got when tried to update credentials.

Failed to open server connection to type PureDisk server mapsn036: Error = 2060023
server is shut down

PranavB

From: pranav_venture < at > hotmail.com
To: veritas-bu < at > mailman.eng.auburn.edu
Subject: Pure Disk Pool Down -MSDP
Date: Wed, 26 Feb 2014 14:31:16 +0530

Hello Geeks !

Good Day !

I am stuck in one issue -we have a pure disk pool created on ZFS file system. I am well aware that symantec doesn't supports this.
Now this was working file till yesterday but since yesterday 09:00CST it has stopped working.

# ./crcontrol --dsstat
Error: -1: NetConnectByAddr: Failed to connect to host: Connection refused (146)
Error: -1: NetConnectByAddr: Failed to connect to spoold on port 10082 using the following interface(s): [ 127.0.0.1 ] (Connection refused) Ensure storage server services are running and operational. V-454-92
Error: 53: Could not establish a connection to 127.0.0.1:10082: connect failed (Connection refused)
Error : Connection failed connection actively refused. Note that the content router needs to be running to get a connection.

Error: 25067: Database: connection to database crdb at server:10085 failed (could not connect to server: Connection refused
Is the server running on host "server" and accepting
TCP/IP connections on port 10085?
)
Error: 25053: Database Manager: could not access storage database (connection actively refused).
Error: 25004: Failed to run database class
Error: 25004: Failed to read startup mode
Error: 26016: Symantec PureDisk Content Router: Initialize failure.

I need some help here ,what should I do ?

Thanks,
Pranavb
Pure Disk Pool Down -MSDP
February 26, 2014 04:38AM
I have had some bad experiences with ZFS under FreeNAS. I suggest that you login to the OS and see what &#8216;zpool status -x&#8217; reports.

I find that when the hard disk has a bad sector ZFS cannot recover easily. If the unreadable block is written, the disk hardware will revector the bad block to a spare. But as ZFS is a copy-on-write file system, you cannot write the bad block e.g. by overwriting the file that has the bad block. The only way around it is to remove the disk from the RAID set, mount it up as UFS and then write to the block, or erase the whole disk. Then add back and resilver. I had a case where ZFS would not let me remove the disk as that did not leave sufficient redundancy. Anyhow having to do all that every time a disk has a bad sector is painful.

So, I suggest that you check that ZFS is OK as a good place to start.

William

[b]From:[/b] veritas-bu-bounces < at > mailman.eng.auburn.edu [mailto] [b]On Behalf Of [/b]pranav batra
[b]Sent:[/b] 26 February 2014 09:01
[b]To:[/b] Veritas
[b]Subject:[/b] [Veritas-bu] Pure Disk Pool Down -MSDP

Hello Geeks !

Good Day !

I am stuck in one issue -we have a pure disk pool created on ZFS file system. I am well aware that symantec doesn't supports this.

Now this was working file till yesterday but since yesterday 09:00CST it has stopped working.

# ./crcontrol --dsstat

Error: -1: NetConnectByAddr: Failed to connect to host: Connection refused (146)

Error: -1: NetConnectByAddr: Failed to connect to spoold on port 10082 using the following interface(s): [ 127.0.0.1 ] (Connection refused) Ensure storage server services are running and operational. V-454-92

Error: 53: Could not establish a connection to 127.0.0.1:10082: connect failed (Connection refused)

Error : Connection failed connection actively refused. Note that the content router needs to be running to get a connection.

Error: 25067: Database: connection to database crdb at server:10085 failed (could not connect to server: Connection refused

Is the server running on host "server" and accepting

TCP/IP connections on port 10085?

)

Error: 25053: Database Manager: could not access storage database (connection actively refused).

Error: 25004: Failed to run database class

Error: 25004: Failed to read startup mode

Error: 26016: Symantec PureDisk Content Router: Initialize failure.

I need some help here ,what should I do ?

Thanks,

Pranavb

This e-mail was sent by GlaxoSmithKline Services Unlimited
(registered in England and Wales No. 1047315), which is a
member of the GlaxoSmithKline group of companies. The
registered address of GlaxoSmithKline Services Unlimited
is 980 Great West Road, Brentford, Middlesex TW8 9GS.
Pure Disk Pool Down -MSDP
February 26, 2014 05:25AM
Geeks !

Please see if you can advise anything on this ?

PranavB

From: pranav_venture < at > hotmail.com
To: veritas-bu < at > mailman.eng.auburn.edu
Subject: Pure Disk Pool Down -MSDP
Date: Wed, 26 Feb 2014 14:31:16 +0530

Hello Geeks !

Good Day !

I am stuck in one issue -we have a pure disk pool created on ZFS file system. I am well aware that symantec doesn't supports this.
Now this was working file till yesterday but since yesterday 09:00CST it has stopped working.

# ./crcontrol --dsstat
Error: -1: NetConnectByAddr: Failed to connect to host: Connection refused (146)
Error: -1: NetConnectByAddr: Failed to connect to spoold on port 10082 using the following interface(s): [ 127.0.0.1 ] (Connection refused) Ensure storage server services are running and operational. V-454-92
Error: 53: Could not establish a connection to 127.0.0.1:10082: connect failed (Connection refused)
Error : Connection failed connection actively refused. Note that the content router needs to be running to get a connection.

Error: 25067: Database: connection to database crdb at server:10085 failed (could not connect to server: Connection refused
Is the server running on host "server" and accepting
TCP/IP connections on port 10085?
)
Error: 25053: Database Manager: could not access storage database (connection actively refused).
Error: 25004: Failed to run database class
Error: 25004: Failed to read startup mode
Error: 26016: Symantec PureDisk Content Router: Initialize failure.

I need some help here ,what should I do ?

Thanks,
Pranavb
Sorry, only registered users may post in this forum.

Click here to login