My offsite Amanda config, which was working nicely under 2.6.1, only
seems to write a single tape with 3.2.1 and I'm at a loss as to why.
I can't find any obvious errors in the debug files or in the
logs. Amanda clearly seems to think it is supposed to use 4 tapes for
each run:
$ su -m backup -c "amadmin offsite tape"
The next Amanda run should go onto tape offsite-019 or a new tape.
tape offsite-020 or a new tape.
tape offsite-021 or a new tape.
tape offsite-022 or a new tape.
But the amanda run writes to one tape and then stops and doesn't do
any others. When the dump is done and 1 tape has been written to I run
amflush, but each run of amflush writes one and only one tape also.
Here is my config, and the amdump and log files from a recent run
along with the taper debug file can be found at
http://www.meridian-enviro.com/rand/amanda/
org "Meridian Off Site"
dumpcycle 1 weeks # Full backup each week
runspercycle 1
runtapes 4
tapecycle 20 tapes
tapetype SDX-700C-AIT3
tapedev "offsite"
labelstr "^offsite-[0-9][0-9]*$"
infofile "/local-project/amanda/info/offsite"
indexdir "/local-project/amanda/index/offsite"
logdir "/var/log/amanda/offsite"
# Offsites get written to tape right away.
flush-threshold-dumped 0
flush-threshold-scheduled 0
taperflush 0
autoflush yes
holdingdisk offsite {
comment "Off Site holding disk"
directory "/local-project/tmp/amanda/holding/offsite"
use -25 gbyte
chunksize 0 gbyte
}
includefile "/usr/local/etc/amanda/amanda-changer.conf"
includefile "/usr/local/etc/amanda/amanda-defaults.conf"
includefile "/usr/local/etc/amanda/amanda-tapetypes.conf"
includefile "/usr/local/etc/amanda/amanda-dumptypes.conf"
includefile "/usr/local/etc/amanda/amanda-interfaces.conf"
##
## The includefile contents are here:
##
## amanda-changer.conf
define changer daily {
tapedev "chg-robot:/dev/daily-changer"
property "tape-device" "0=tape:/dev/daily-tape"
changerfile"/var/amanda/changer.daily.status"
}
define changer offsite {
tapedev "chg-robot:/dev/offsite-changer"
property "tape-device" "0=tape:/dev/offsite-tape"
changerfile"/var/amanda/changer.offsite.status"
}
## amanda-defaults.conf
mailto "backup"
dumpuser "backup"
printer "lp"
usetimestamps yes
netusage 1000 mbps
inparallel 20
device-output-buffer-size 5 mb
dumporder "BTBTBTBTBTSSSSSSSSSs"
taperalgo largestfit
bumpsize 100 mb
bumpmult 2
bumpdays 3 days
reserve 80
displayunit "m"
dtimeout 1800
etimeout 300
columnspec "HostName=0:10,Disk=1:24,Level=1:2,OrigKB=1:8,OutKB=1:8,Compress=1:5,DumpTime=1:6,DumpRate=1:6,TapeTime=1:5,TapeRate=1:7"
## amanda-tapetypes.conf
define tapetype SDX-700C-AIT3-parts {
comment "Sony LIB-152E AIT-3 changer with 230m tapes"
length 96000 mbytes # Supposedly a 100 GB (native) tape
filemark 5637 kbytes
speed 12000 kps # 12 MB/s (native) transfer rate
part-size 20 gb
part-cache-type disk
part-cache-dir "/local-project/tmp/amanda/part-cache/daily"
}
define tapetype SDX-700C-AIT3 {
comment "Sony LIB-152E AIT-3 changer with 230m tapes"
length 96000 mbytes # Supposedly a 100 GB (native) tape
filemark 5637 kbytes
speed 12000 kps # 12 MB/s (native) transfer rate
}
define tapetype SDX-500C-230m {
comment "Sony LIB-152E AIT-2 changer with 230m tapes"
length 48000 mbytes # Supposedly a 50 GB (native) tape
filemark 5637 kbytes
speed 6144 kps # 6 MB/s (native) transfer rate
}
define tapetype HP-C5713A-150m {
comment "Hewlett-Packard C5713a DDS-4 changer with 150 meter tapes"
length 19500 mbytes # Supposedly a 20 GB (native) tape
filemark 0 kbytes
speed 3072 kbps # 3 MB/s (native) transfer rate
}
define tapetype HP-C5713A-125m {
comment "Hewlett-Packard C5713A DDS-4 changer with 125 meter tapes"
length 11500 mbytes # Supposedly a 12 GB (native) tape
filemark 0 kbytes
speed 3072 kbps # 3 MB/s (native) transfer rate
}
define tapetype HP-C5713A-120m {
comment "Hewlett-Packard C5713A DDS-4 changer with 120 meter tapes"
length 3500 mbytes # Supposedly a 4 GB (native) tape
filemark 0 kbytes
speed 500 kbps
}
define tapetype HP-C1557A-125m {
comment "Hewlett-Packard C1557A DDS-3 changer with 125 meter tapes"
length 11500 mbytes # Supposedly a 12 GB (native) tape
filemark 0 kbytes
speed 1024 kbps
}
define tapetype HP-C1557A-120m {
comment "Hewlett-Packard C1557A pretending to be a DDS-2 with 120 meter tapes"
length 3500 mbytes # Supposedly a 4 GB (native) tape
filemark 100 kbytes
speed 500 kbps
}
define tapetype HP-C1557A-90m {
comment "Hewlett-Packard C1557A pretending to be a DDS-2 DAT with 90 meter tapes"
length 1900 mbytes # Supposedly a 2 GB (native) tape
filemark 100 kbytes
speed 500 kbps
}
define tapetype SDT-7000-120m {
comment "Sony SDT-7000 DDS-2 DAT with 120 meter tapes"
length 3500 mbytes # Supposedly a 4 GB (native) tape
filemark 100 kbytes
speed 750 kbps
}
define tapetype SDT-7000-90m {
comment "Sony SDT-7000 DDS-2 DAT with 90 meter tapes"
length 1900 mbytes # Supposedly a 2 GB (native) tape
filemark 100 kbytes
speed 750 kbps
}
define tapetype SDT-5000-120m {
comment "Sony SDT-5000 DDS-2 DAT with 120 meter tapes"
length 1200 mbytes # Supposedly a 4 GB tape ??
filemark 100 kbytes
speed 115 kbps
}
define tapetype SDT-5000-90m {
comment "Sony SDT-5000 DDS-2 DAT with 90 meter tapes"
length 1850 mbytes # Supposedly a 2 GB tape
filemark 100 kbytes
speed 350 kbps
}
define tapetype SDT-5000-60m {
comment "Sony SDT-5000 DDS-2 DAT with 60 meter tapes"
length 1200 mbytes # Supposedly a 1.3 GB tape
filemark 100 kbytes
speed 350 kbps
}
define tapetype DISK {
comment "Dump to local disk for testing."
length 10240 mbytes
}
## amanda-dumptypes.conf
define dumptype defaults {
comment "Global defaults for dump types"
auth "BSD"
compress client fast
comprate 0.60, 0.60 # Be somewhat pessemestic about guesses
estimate SERVER
index yes
holdingdisk yes
}
define dumptype dump {
defaults
auth "bsdtcp"
program "DUMP"
}
define dumptype offdump {
defaults
auth "bsdtcp"
dumpcycle 0
program "DUMP"
}
define dumptype tcp {
defaults
auth "bsdtcp"
program "GNUTAR"
exclude list ".amanda.excludes"
}
define dumptype tar {
defaults
program "GNUTAR"
exclude list ".amanda.excludes"
}
define dumptype offsite {
defaults
program "GNUTAR"
record no
dumpcycle 0
exclude list ".amanda.excludes"
}
define dumptype offtcp {
defaults
auth "bsdtcp"
program "GNUTAR"
record no
dumpcycle 0
exclude list ".amanda.excludes"
}
define dumptype ssh {
defaults
auth "ssh"
ssh-keys "/var/amanda/.ssh/id_rsa"
client-username "backup"
}
define dumptype daily-tar-ssh {
ssh
program "GNUTAR"
exclude list optional ".amanda.excludes"
}
define dumptype offsite-tar-ssh {
ssh
program "GNUTAR"
record no
dumpcycle 0
exclude list optional ".amanda.excludes"
}
## amanda-interfaces
define interface local {
comment "A local disk"
use 10000 mbps
}
define interface dc0 {
comment "100 Mbps Ethernet"
use 10000 mbps
}
