Although this is not a big problem I wanted to report this. Last night
a job became blocked waiting for a tape that is in the changer. This
was on the first drive of the changer and a previous job of a
different pool had run on that drive and unloaded the media. I am
using bacula-2.1.18 for the director and 2.1.12 for the sd that is
connected to the autochanger.
19-Jun 20:30 fileserver-dir: Start Backup JobId 5395,
Job=dev2-outlook.2007-06-19_20.30.03
19-Jun 20:30 fileserver-dir: Using Device "LTO2-0"
19-Jun 20:31 dev2-fd: DIR and FD clocks differ by 86 seconds, FD
automatically adjusting.
19-Jun 20:30 fileserver-dir: Start Backup JobId 5397,
Job=radimgws3-full.2007-06-19_20.30.05
19-Jun 20:30 fileserver-dir: Using Device "LTO2-0"
19-Jun 20:33 radimgws3-fd: DIR and FD clocks differ by 211 seconds, FD
automatically adjusting.
19-Jun 20:30 fileserver-dir: Start Backup JobId 5398,
Job=radimgws40-outlook.2007-06-19_20.30.06
19-Jun 20:30 fileserver-dir: Using Device "LTO2-0"
19-Jun 20:31 radimgws40-fd: DIR and FD clocks differ by 86 seconds, FD
automatically adjusting.
19-Jun 20:26 dev6-sd: 3307 Issuing autochanger "unload slot 9, drive 0" command.
<removed info from several jobs on 2 other tape drives but nothing on this one>
19-Jun 21:30 dev6-sd: Please mount Volume "A00029" or label a new one for:
Job: dev2-outlook.2007-06-19_20.30.03
Storage: "LTO2-0" (/dev/nst0)
Pool: UserBackup-LTO2
Media type: LTO-2
<snip>
Device status:
Autochanger "Magnum224-0" with devices:
"LTO2-0" (/dev/nst0)
"LTO2-1" (/dev/nst1)
Device "LTO2-0" (/dev/nst0) is not open.
Device is BLOCKED waiting for mount of volume "A00029",
Pool: UserBackup-LTO2
Media type: LTO-2
Drive 0 is not loaded.
Device "LTO2-1" (/dev/nst1) is mounted with:
Volume: A00030
Pool: LTO2-Study-Backup
Media type: LTO-2
Slot 1 is loaded in drive 1.
Total Bytes=258,048 Blocks=3 Bytes/block=86,016
Positioned at File=3 Block=0
Device "DEV6-DLT-IV-0" (/dev/nst2) is not open.
Device "DEV6-DVD-WRITER" (/dev/dvd) is not open.
====
In Use Volume status:
A00029 on device "LTO2-0" (/dev/nst0)
====
As the following shows A00029 is in the changer at slot 3.
#list media pool=UserBackup-LTO2
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| mediaid | volumename | volstatus | enabled | volbytes |
volfiles | volretention | recycle | slot | inchanger | mediatype |
lastwritten |
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 125 | A00009 | Full | 1 | 336,364,067,603 |
444 | 31,536,000 | 0 | 9 | 0 | LTO-2 |
2006-12-10 14:24:45 |
| 139 | A00014 | Full | 1 | 396,013,750,272 |
455 | 31,536,000 | 0 | 12 | 0 | LTO-2 |
2007-01-26 20:10:59 |
| 145 | A00020 | Append | 1 | 176,974,221,312 |
200 | 31,536,000 | 1 | 18 | 1 | LTO-2 |
2007-06-15 08:53:16 |
| 146 | A00021 | Full | 1 | 375,772,594,176 |
540 | 31,536,000 | 1 | 22 | 0 | LTO-2 |
2007-03-12 21:05:38 |
| 155 | A00024 | Full | 1 | 380,788,660,224 |
433 | 31,536,000 | 1 | 2 | 0 | LTO-2 |
2007-04-10 20:34:39 |
| 157 | A00026 | Full | 1 | 383,478,746,112 |
412 | 31,536,000 | 1 | 4 | 0 | LTO-2 |
2007-05-08 20:48:16 |
| 163 | A00029 | Append | 1 | 104,709,556,224 |
113 | 31,536,000 | 1 | 3 | 1 | LTO-2 |
2007-06-18 20:56:51 |
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
#
I also tried update slots but that did not help.
When I looked at the changer the A00029 is in the changer at slot 3
and there is no tape in the drive. I have no other debugging info.
John
