Hello,
We are running Bacula 5.0.1 on Ubuntu 10.04 64-bit on a Dell server with an internal LTO-3 tape drive. We have three pools (Daily, Weekly and Monthly) configured and Bacula has been running without incident for almost a year now until today.
When running the list nextvol command the following error message appears:
Could not find next Volume for Job Windows Server Backup (Pool=Weekly, Level=Full)
When I run the list media command for the Weekly pool three tapes are listed in the used status with a volume retention period of 14 days. The oldest tape was written on 5-24-2012 so I would expect this tape to be used next.
Pool: Weekly
+---------+------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten |
+---------+------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 9 | 32X009 | Used | 1 | 92,813,349,888 | 94 | 1,209,600 | 1 | 0 | 0 | LTO-3 | 2012-06-14 21:58:35 |
| 10 | 32X010 | Used | 1 | 1 | 0 | 1,209,600 | 1 | 0 | 0 | LTO-3 | 2012-05-24 21:57:55 |
| 11 | 32X011 | Used | 1 | 1 | 0 | 1,209,600 | 1 | 0 | 0 | LTO-3 | 2012-05-31 21:57:28 |
+---------+------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
Any help would be appreciated in determining why Bacula cannot find the next volume.
Jack Cobb
