I'm trying to migrate from one disk based storage to another. I started with:
http://bacula.org/5.0.x-manuals/en/main/main/Migration_Copy.html
Following that, it seem that I need a new Pool, and that pool defines the new storage I'm
moving to. I can't get that to work.
I define my migrate jobs as:
Job {
Name = "migrate-gizmo"
Type = Migrate
Level = Full
Client = gizmo-fd
FileSet = "Full Set"
Messages = Standard
Pool = gizmoPool
Maximum Concurrent Jobs = 4
Selection Type = Volume
Selection Pattern = "gizmo"
Priority = 9
}
And define the storage and pools as below, I get the error when I try to load the config.
gizmo-dir JobId 0: Fatal error: No storage specified in Job "migrate-gizmo" nor in Pool.
gizmo-dir JobId 0: Error: Please correct configuration file: /etc/bacula/bacula-dir.conf
gizmo-dir JobId 0: Error: Resetting previous configuration.
If I add the new Storage to the pool I'm trying to move FROM, gizmonPool, the config
loads. Running that though, results in all the jobs showing a status:
migrate-gizmo.2010-03-12_00.19.09_07 is waiting on max Storage jobs
Also, as I would expect, its reading and writing to the same storage:
Run Migration job
JobName: migrate-gizmo
Bootstrap: *None*
Client: gizmo-fd
FileSet: Full Set
Pool: gizmoPool (From Job resource)
Read Storage: gizmoStore2 (From Pool resource)
Write Storage: gizmoStore2 (From Storage from Pool's NextPool resource)
JobId: *None*
When: 2010-03-12 00:33:57
Catalog: MyCatalog
Priority: 9
I've been fiddling with this for several hours. I'm sure its something simple and stupid
on my part, but I can't figure out what. I'm running Bacula 5.0.1 on Centos 5.4.
Thanks,
Andy
Storage {
Name = gizmoStore
Address = gizmo # N.B. Use a fully qualified name here
SDPort = 9103
Password = "asdf"
Device = gizmoStorage
Media Type = FileGizmo
AllowCompression = Yes
}
Storage {
Name = gizmoStore2
Address = caprica # N.B. Use a fully qualified name here
SDPort = 9103
Password = "asdf"
Device = gizmoStorage2
Media Type = FileGizmo
AllowCompression = Yes
}
Pool {
Name = gizmoPool
Volume Use Duration = 23 h
Pool Type = Backup
LabelFormat = "gizmo-"
AutoPrune = yes
VolumeRetention = 6 months
Maximum Volumes = 181
Recycle = yes
Recycle Oldest Volume = yes
Next Pool = gizmoPool2
Action On Purge = Truncate
}
Pool {
Name = gizmoPool2
Storage = gizmoStore2
Volume Use Duration = 23 h
Pool Type = Backup
LabelFormat = "gizmo2-"
AutoPrune = yes
VolumeRetention = 6 months
Maximum Volumes = 181
Recycle = yes
Recycle Oldest Volume = yes
Storage = gizmoStore2
}
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users < at > lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
