Hello,
I see this for quite a while now and it does not seem to disappear with=20
2.0.1... maybe someone has the same problem?
yesterday I was upgrading my system and ran a "InitCatalog" manually=20
thereafter. This morning my regular verify job failed with reporting that=20
some hundred files have changed (all in /lib, /sbin and /usr - stuff update=
d=20
by rpm).
2007-03-13 08:37:11 bender.in.oldnewyork: verify-bender.2007-03-13_08.30.00
[...]
Error: Bacula 2.0.1 (12Jan07): 13-Mar-2007 08:37:11
=C2=A0 JobId: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0183
=C2=A0 Job: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =
=C2=A0verify-bender.2007-03-13_08.30.00
=C2=A0 FileSet: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0veri=
fy-bender
=C2=A0 Verify Level: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Catalog
=C2=A0 Client: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 bend=
er-verify
=C2=A0 Verify JobId: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 182
=C2=A0 Verify Job: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0=20
=C2=A0 Start time: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 13-Mar-2007 08=
:30:02
=C2=A0 End time: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 13-Mar-20=
07 08:37:11
=C2=A0 Files Examined: =C2=A0 =C2=A0 =C2=A0 =C2=A0 49,803
=C2=A0 Non-fatal FD errors: =C2=A0 =C2=A00
=C2=A0 FD termination status: =C2=A0OK
=C2=A0 Termination: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0*** Verify Err=
or ***
now I repeated the very same procedure: manual "InitCatalog" job, then the=
=20
regular (but this time manually started) verify job. This time it went OK. =
No=20
differences found. I bet that tomorrows automatic verify job will also=20
terminate OK as that is what always happened previously.
13-Mar 11:45 bender.in.oldnewyork: Bacula 2.0.1 (12Jan07): 13-Mar-2007=20
11:45:19
JobId: 185
Job: verify-bender.2007-03-13_11.38.07
FileSet: verify-bender
Verify Level: Catalog
Client: bender-verify
Verify JobId: 184
Verify Job:
Start time: 13-Mar-2007 11:38:09
End time: 13-Mar-2007 11:45:19
Files Examined: 49,803
Non-fatal FD errors: 0
FD termination status: OK
Termination: Verify OK
to me it looks like InitCatalog must run twice before all changes are known=
=20
and the regular verify behaves the way it should.
(note: I have not done any changes to the system between the two jobs and a=
uto=20
update is disabled. I am not running a virus scanner or anything else that=
=20
could touch the files).
regards,
Stephan
PS: i can post the complete bconsole conversations and/or config if needed
