To unmount a/all volume(s), always run "nsrjb -uv", not "nsrjb -Hev".=20
The/all mounted vol(s) will be unmounted and ejected properly.
I always remember, since long time ago, inventory if volumes=20
being mounted and in-use (state : busy reading, busy writing,=20
or reading/writing idle) to be lost during an nsrjb -HEv.
=20
If it's correct, your nsrjb output should look at
following one : (no stars)
Slot volume name pool Volume id location
1: test.001
2: test.002 Default 123456 hp
3: test.003 Default 123457 hp
4: test.004 Default 123458 hp
At that stage, you are correct reinventorying the bin-slot.
With no re-inventory, networker may loop requesting test.001 to
be loaded and backup to fail due to inactivity.
HTH,
Th
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
=20
********* ********* HEWLETT - PACKARD
******* h ******* 1 Rue de l'aeronef/Luchtschipstraat
****** h ****** 1140 Bruxelles/Brussel/Brussels
***** hhhh pppp ***** =20
***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
****** p ****** BELGIUM
******* p ******* =20
********* ********* Phone : +32 (0)2 / 729.85.42 =20
Mobile : +32 (0)498/ 94.60.85=20
Fax : +32 (0)2 / 729.88.30 =20
I N V E N T Email/MSN : thierry.faidherbe < at > hp.com
Internet :
http://www.hp.com/=20
________________________________________________________________________
MOBISTAR SA/NV=20
CSO/CTO/CEO/SSD/SBI
SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2 / 745.75.81 =20
Avenue Jean Mermoz, 32 Fax : +32 (0)2 / 745.89.56 =20
6041 GOSSELIES Email : tfhaidhe < at > mail.mobistar.be
BELGIUM Web :
http://www.mobistar.be/
________________________________________________________________________
=20
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU]
On Behalf Of Kwon Sang Deuk
Sent: Tuesday, December 14, 2004 1:13 PM
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Subject: [Networker] ask you to response about media db
My backup environment consist with the system which has DDS4 drive in HP
Autoroader. and NetWorker Server is W2K
But Backup is failed occsionally when the job is running
Because waiting available media however Library has enough usable media
So I seen the neworker log, Library status and system log
the first i find the reason that backup is failed . The Frist reason is
networker hasn't certainly media Volume id that is labeled by user
Let's See the detail status
1> Labeling four DDS tape
2> networker did it surely. and The Volume is test.001, test.002.
test.003, test.004
3> backup is running after test.001 Volum is mounted and the job is
successed
4> The status is media of test.001 is mouted , and then i umounted by
command of networkr
# nsrjb -HEv
5 > But networker media db hasn't information about test.001 by nsrjb
Networker only has incorrent informat about test.001
volume name pool Volume id location
test.001 * * * *
test.002 Default 123456 hp
test.003 Default 123457 hp
test.004 Default 123458 hp
6> and so i use command nsrjb -IEv
if it is runed Networker has correct information about test.001
What reason networker lose media information when media is umounted ?
Do you have another idea ? if you have skill about it send me it
....plz
Note: To sign off this list, send a "signoff networker" command via
email
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=
*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D
Note: To sign off this list, send a "signoff networker" command via email
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D
