Backup Central

I have a Daily Incremental Pool/Group that keeps requesting for Default
Tapes. Hale of the save Sets go to the correct Pool/Tape and the other half
requests Default Tape

It is an NT backup

c:\ and e:\ show as completed savesets and go to the correct tape but
System STATE:\ and SYSTEM DB:\ show as incomplete save sets and wait for a
default tape to be mounted.

What's wrong with this picture???

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu

I'm having the same problem/issue.
Tried to delete and recreate the client, schedule, group and pool, still=
the same problem.
=0D
Here are my savesets:
=0D
SYS:
LOG:
Server Specific Info
=0D
LOG: is saved in the correct pool (Novell), then=0D
SYS and Server Specific Info: goes to a default tape.
=0D
The client O/S is Netware v6.
=0D
Good luck on this.
=0D
regards,
Librado



swmartin < at > LINK.COM 04/05/05 3:22 pm >>>
I have a Daily Incremental Pool/Group that keeps requesting for Default
Tapes. Hale of the save Sets go to the correct Pool/Tape and the other half
requests Default Tape

It is an NT backup

c:\ and e:\ show as completed savesets and go to the correct tape but
System STATE:\ and SYSTEM DB:\ show as incomplete save sets and wait for a
default tape to be mounted.

What's wrong with this picture???

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu=0D
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D





DISCLAIMER: The information transmitted is intended only
for the addressee and may contain confidential,
proprietary and/or privileged material. Any
unauthorized review, distribution or other use
of or the taking of any action in reliance upon
this information is prohibited. If you received
this in error, please contact the sender and=0D
delete or destroy this message and any copies. =0D

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D

I have found that happens when if you have the pool set to only be able
to dump certain levels of backups.
If the volume it is trying to backup is attempting a level that is not
allowed for the given pool, it will
Go to the default pool.

-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER < at > LISTSERV.TEMPLE.EDU] On Behalf Of Librado Pamintuan
Sent: Tuesday, April 05, 2005 5:39 PM
To: NETWORKER < at > LISTSERV.TEMPLE.EDU
Subject: Re: [Networker] Default Tape Request


I'm having the same problem/issue.
Tried to delete and recreate the client, schedule, group and
pool, still the same problem.


Here are my savesets:


SYS:
LOG:
Server Specific Info


LOG: is saved in the correct pool (Novell), then

SYS and Server Specific Info: goes to a default tape.


The client O/S is Netware v6.


Good luck on this.


regards,
Librado



swmartin < at > LINK.COM 04/05/05 3:22 pm >>>
I have a Daily Incremental Pool/Group that keeps requesting
for Default Tapes. Hale of the save Sets go to the correct
Pool/Tape and the other half requests Default Tape

It is an NT backup

c:\ and e:\ show as completed savesets and go to the correct
tape but System STATE:\ and SYSTEM DB:\ show as incomplete
save sets and wait for a default tape to be mounted.

What's wrong with this picture???

--
Note: To sign off this list, send a "signoff networker"
command via email to listserv < at > listserv.temple.edu or visit
the list's Web site at
http://listserv.temple.edu/archives/networker.> html where you
Questions regarding this list should be sent to stan < at > temple.edu






DISCLAIMER: The information transmitted is intended only
for the addressee and may contain confidential,
proprietary and/or privileged material. Any
unauthorized review, distribution or other use
of or the taking of any action in reliance upon
this information is prohibited. If you received
this in error, please contact the sender and

delete or destroy this message and any copies.


--
Note: To sign off this list, send a "signoff networker"
command via email to listserv < at > listserv.temple.edu or visit
the list's Web site at
http://listserv.temple.edu/archives/networker.> html where you
Questions regarding this list should be sent to
stan < at > temple.edu


Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu

This is from one group with one client going to one pool...

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu

I already checked/verified this setting and the 'Novell Pool' level is set=
from 'Full, level 1 to 9 and Inc.
=0D
I even tried the 'level' setting in the Group window to ensure that all=
clients in the group are on the same level, but still same problem.


"Buxbaum, Donna" <Donna_Buxbaum < at > brown.edu> 04/05/05 3:42 pm >>>
I have found that happens when if you have the pool set to only be able
to dump certain levels of backups.=0D
If the volume it is trying to backup is attempting a level that is not
allowed for the given pool, it will
Go to the default pool.=0D

-----Original Message-----
From: Legato NetWorker discussion=0D
[mailto:NETWORKER < at > LISTSERV.TEMPLE.EDU] On Behalf Of Librado Pamintuan
Sent: Tuesday, April 05, 2005 5:39 PM
To: NETWORKER < at > LISTSERV.TEMPLE.EDU=0D
Subject: Re: [Networker] Default Tape Request
=0D
=0D
I'm having the same problem/issue.
Tried to delete and recreate the client, schedule, group and=0D
pool, still the same problem.
=0D
=0D
Here are my savesets:
=0D
=0D
SYS:
LOG:
Server Specific Info
=0D
=0D
LOG: is saved in the correct pool (Novell), then
=0D
SYS and Server Specific Info: goes to a default tape.
=0D
=0D
The client O/S is Netware v6.
=0D
=0D
Good luck on this.
=0D
=0D
regards,
Librado
=0D
=0D
=0D
swmartin < at > LINK.COM 04/05/05 3:22 pm >>>
I have a Daily Incremental Pool/Group that keeps requesting=0D
for Default Tapes. Hale of the save Sets go to the correct=0D
Pool/Tape and the other half requests Default Tape
=0D
It is an NT backup
=0D
c:\ and e:\ show as completed savesets and go to the correct=0D
tape but System STATE:\ and SYSTEM DB:\ show as incomplete=0D
save sets and wait for a default tape to be mounted.
=0D
What's wrong with this picture???
=0D
--
Note: To sign off this list, send a "signoff networker"=0D
command via email to listserv < at > listserv.temple.edu or visit=0D
the list's Web site at=0D
http://listserv.temple.edu/archives/networker.> html where you=0D
Questions regarding this list should be sent to stan < at > temple.edu=0D
=0D
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D
=0D
=0D
=0D
=0D
=0D
DISCLAIMER: The information transmitted is intended only
for the addressee and may contain confidential,
proprietary and/or privileged material. Any
unauthorized review, distribution or other use
of or the taking of any action in reliance upon
this information is prohibited. If you received
this in error, please contact the sender and
=0D
delete or destroy this message and any copies.=0D
=0D
=0D
--
Note: To sign off this list, send a "signoff networker"=0D
command via email to listserv < at > listserv.temple.edu or visit=0D
the list's Web site at=0D
http://listserv.temple.edu/archives/networker.> html where you=0D
Questions regarding this list should be sent to=0D
stan < at > temple.edu=0D
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D
=0D





DISCLAIMER: The information transmitted is intended only
for the addressee and may contain confidential,
proprietary and/or privileged material. Any
unauthorized review, distribution or other use
of or the taking of any action in reliance upon
this information is prohibited. If you received
this in error, please contact the sender and=0D
delete or destroy this message and any copies. =0D

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D

My levels are all not selected which should default to all selected
(Earlier problem required this)

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu

Sid,

Even in an Incremental backup the SYSTEM STATE:\ and SYSTEM DB:\ save sets
are still backed up at level FULL. So if your pool doesn't allow level FULL
backups then those save sets will have to be backed up to a pool that does
allow that level. Also, indexes get backed up at level 9 in an incremental
backup so that can cause problems as well.

I find it works best for me to not fill in any of the backup levels for
pools.

Hope this helps.

David Werth
Garmin AT, Inc
(formerly: UPS Aviation Technologies)
(formerly: II Morrow)
Salem, Oregon
dave.werth < at > garmin.com

-----Original Message-----
From: Sid Martin [mailto:swmartin < at > LINK.COM]
Sent: Tuesday, April 05, 2005 2:22 PM
To: NETWORKER < at > LISTSERV.TEMPLE.EDU
Subject: [Networker] Default Tape Request

I have a Daily Incremental Pool/Group that keeps requesting for Default
Tapes. Hale of the save Sets go to the correct Pool/Tape and the other half
requests Default Tape

It is an NT backup

c:\ and e:\ show as completed savesets and go to the correct tape but
System STATE:\ and SYSTEM DB:\ show as incomplete save sets and wait for a
default tape to be mounted.

What's wrong with this picture???

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu


-------------------------
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please contact the sender and delete all copies.
Thank you for your cooperation

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu

Sid Martin wrote:
This is from one group with one client going to one pool...

--


I have seen this also. I have seen cases where all save sets from a
backup go to the specified pools, but just occasionally with no
configuration changes whatsoever an odd save set will insist on
requesting the Default pool. Then just as inexplicably it will work
correctly on the the next run of the group. Must be a bug.

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu

Are you seeing SAVEFS failures in the Daemon.log for this client when
you run the backup? If so, then there is a patch for this, depending on
the version you are running. I ran into this issue in 7.1.2 and 7.2 on
Windows. LGTpa is LGTpa73655 for NW 7.2 and LGTpa68362 for NW 7.1.2.

I hope that might help if this is your situation.

Cheers,
Jim

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTSERV.TEMPLE.EDU]
On Behalf Of Sid Martin
Sent: April 5, 2005 5:22 PM
To: NETWORKER < at > LISTSERV.TEMPLE.EDU
Subject: [Networker] Default Tape Request


I have a Daily Incremental Pool/Group that keeps requesting for Default
Tapes. Hale of the save Sets go to the correct Pool/Tape and the other
half requests Default Tape

It is an NT backup

c:\ and e:\ show as completed savesets and go to the correct tape but
System STATE:\ and SYSTEM DB:\ show as incomplete save sets and wait
for a default tape to be mounted.

What's wrong with this picture???

Note: To sign off this list, send a "signoff networker" command via
email to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can also
view and post messages to the list. Questions regarding this list should
be sent to stan < at > temple.edu

Note: To sign off this list, send a "signoff networker" command via email
to listserv < at > listserv.temple.edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
should be sent to stan < at > temple.edu