Backup Central

Hello all,

Two days ago our backups on our Exchange 2003 server stopped working. We
have recently installed Exchange 2003 on a Windows 2003 box. The night the
first backup failed we were migrating our public folders from the 5.5 server
to the new 2003 server. The 5.5 server wasn't being backed up as we were
using it's licence to backup the 2003 server (this had been working for a
about a week). I can successfully make a backup is I start it from the
client software on Exchange, it is the groups that is failing.

This is the log of the attempted backup

Dec 23 12:37:48 backup_server: NetWorker savegroup: (info) starting
msexchange (with 1 client(s))
Dec 23 12:39:11 backup_server: NetWorker savegroup: (alert) msexchange
completed, total 1 client(s), 0 Hostname(s) Unresolved, 1 Failed, 0
Succeeded. (exch-s01 Failed)
Dec 23 12:39:11 backup_server: Start time: Thu Dec 23 12:37:47 2004
Dec 23 12:39:11 backup_server: End time: Thu Dec 23 12:39:11 2004
Dec 23 12:39:11 backup_server: --- Unsuccessful Save Sets ---
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ 1 retry attempted
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ System Version:
5.2 Build 3790
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ ESEBCLI2.DLL
Version: 6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Performing an
Exchange save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Parsing parameters
from the command line
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ xchutil(996):
Invalid application name SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Error parsing
parameter: SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Backup operation
finished with errors.
Dec 23 12:39:11 qbackup_server: * exch-s01:MSEXCH:\ 1 retry attempted
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ System Version: 5.2
Build 3790
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ ESEBCLI2.DLL Version:
6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Performing an Exchange
save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Parsing parameters from
the command line
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ xchutil(1184): Bad
argument(s)
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Error parsing parameter:
MSEXCH:\
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Backup operation finished
with errors.
Dec 23 12:39:11 backup_server: --- Successful Save Sets ---
Dec 23 12:39:11 backup_server: backup_server: index:exch-s01 level=full,
19 KB 00:00:56 5 files

I hope i have included enough info for someone to point me in the right
direction because I haven't been able to find any info through google that
helps.

Thanks

Tim Aitken

Note: To sign off this list, send a "signoff networker" command via email
should be sent to stan < at > temple.edu

Tim,
You seem to have (the) wrong entries in the savesets field.
When you do an Exchange backup you cannot do from the same client
instance regular savesets backup as "SYSTEM STATE:\".
Leave in the savesets field only the MSEXCH: type of saveset names.
Itzik

-----Original Message-----
From: Legato NetWorker discussion=20
[mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU] On Behalf Of Tim Aitken
Sent: Thursday, December 23, 2004 04:01
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Subject: [Networker] MSEXCH Failing
=20
Hello all,
=20
Two days ago our backups on our Exchange 2003 server stopped=20
working. We
have recently installed Exchange 2003 on a Windows 2003 box.=20
The night the
first backup failed we were migrating our public folders from=20
the 5.5 server
to the new 2003 server. The 5.5 server wasn't being backed up=20
as we were
using it's licence to backup the 2003 server (this had been=20
working for a
about a week). I can successfully make a backup is I start it from the
client software on Exchange, it is the groups that is failing.
=20
This is the log of the attempted backup
=20
Dec 23 12:37:48 backup_server: NetWorker savegroup: (info) starting
msexchange (with 1 client(s))
Dec 23 12:39:11 backup_server: NetWorker savegroup: (alert) msexchange
completed, total 1 client(s), 0 Hostname(s) Unresolved, 1 Failed, 0
Succeeded. (exch-s01 Failed)
Dec 23 12:39:11 backup_server: Start time: Thu Dec 23 12:37:47 2004
Dec 23 12:39:11 backup_server: End time: Thu Dec 23 12:39:11 2004
Dec 23 12:39:11 backup_server: --- Unsuccessful Save Sets ---
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ 1=20
retry attempted
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ =20
nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ =20
System Version:
5.2 Build 3790
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ ESEBCLI2.DLL
Version: 6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ =20
Performing an
Exchange save operation; save level is Full (Legato Backup=20
Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ =20
Parsing parameters
from the command line
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ =20
xchutil(996):
Invalid application name SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ =20
Error parsing
parameter: SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\=20
Backup operation
finished with errors.
Dec 23 12:39:11 qbackup_server: * exch-s01:MSEXCH:\ 1 retry attempted
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ System=20
Version: 5.2
Build 3790
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ =20
ESEBCLI2.DLL Version:
6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ =20
Performing an Exchange
save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Parsing=20
parameters from
the command line
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ xchutil(1184): Bad
argument(s)
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Error=20
parsing parameter:
MSEXCH:\
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Backup=20
operation finished
with errors.
Dec 23 12:39:11 backup_server: --- Successful Save Sets ---
Dec 23 12:39:11 backup_server: backup_server:=20
index:exch-s01 level=3Dfull,
19 KB 00:00:56 5 files
=20
I hope i have included enough info for someone to point me in=20
the right
direction because I haven't been able to find any info=20
through google that
helps.
=20
Thanks
=20
Tim Aitken
=20
--
Note: To sign off this list, send a "signoff networker"=20
command via email
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=
*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D
=20

*************************************************************************=
*************************
The contents of this email and any attachments are confidential.
It is intended for the named recipient(s) only.
If you have received this email in error please notify the system manager=
or the=20
sender immediately and do not disclose the contents to any one or make co=
pies.

MBI - System Team
*************************************************************************=
*************************

Note: To sign off this list, send a "signoff networker" command via email
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D

in the "save set" field (we are a windows environment - unix may differ)
of the client, you need:
MSEXCH: for the databases, and
MSEXCH:MB for mailboxes

hope this gets you going again

michael brooks ........... michaelb < at > sequoiains.com
Network Administrator .... 831.657.4539 (phone)
Sequoia Insurance ........ 831.657.4512 (fax)

"Flying is learning how to throw yourself at the ground and miss"

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU]
On Behalf Of Tim Aitken
Sent: Wednesday, December 22, 2004 6:01 PM
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Subject: [Networker] MSEXCH Failing

Hello all,

Two days ago our backups on our Exchange 2003 server stopped working. We
have recently installed Exchange 2003 on a Windows 2003 box. The night
the first backup failed we were migrating our public folders from the
5.5 server to the new 2003 server. The 5.5 server wasn't being backed up
as we were using it's licence to backup the 2003 server (this had been
working for a about a week). I can successfully make a backup is I start
it from the client software on Exchange, it is the groups that is
failing.

This is the log of the attempted backup

Dec 23 12:37:48 backup_server: NetWorker savegroup: (info) starting
msexchange (with 1 client(s)) Dec 23 12:39:11 backup_server: NetWorker
savegroup: (alert) msexchange completed, total 1 client(s), 0
Hostname(s) Unresolved, 1 Failed, 0 Succeeded. (exch-s01 Failed)
Dec 23 12:39:11 backup_server: Start time: Thu Dec 23 12:37:47 2004
Dec 23 12:39:11 backup_server: End time: Thu Dec 23 12:39:11 2004
Dec 23 12:39:11 backup_server: --- Unsuccessful Save Sets --- Dec 23
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ 1 retry attempted Dec
23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ System Version:
5.2 Build 3790
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ ESEBCLI2.DLL
Version: 6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Performing an
Exchange save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Parsing
parameters from the command line Dec 23 12:39:11 backup_server: *
exch-s01:SYSTEM STATE:\ xchutil(996):
Invalid application name SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Error parsing
parameter: SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Backup
operation finished with errors.
Dec 23 12:39:11 qbackup_server: * exch-s01:MSEXCH:\ 1 retry attempted
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23
12:39:11 backup_server: * exch-s01:MSEXCH:\ System Version: 5.2 Build
3790 Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ ESEBCLI2.DLL
Version:
6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Performing an
Exchange save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Parsing parameters
from the command line Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\
xchutil(1184): Bad
argument(s)
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Error parsing
parameter:
MSEXCH:\
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Backup operation
finished with errors.
Dec 23 12:39:11 backup_server: --- Successful Save Sets ---
Dec 23 12:39:11 backup_server: backup_server: index:exch-s01
level=3Dfull,
19 KB 00:00:56 5 files

I hope i have included enough info for someone to point me in the right
direction because I haven't been able to find any info through google
that helps.

Thanks

Tim Aitken

Note: To sign off this list, send a "signoff networker" command via
view and post messages to the list. Questions regarding this list should
be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=
*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D

Note: To sign off this list, send a "signoff networker" command via email
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D

My setup on a unix server has the save sets as:

MSEXCH:IS
MSEXCH:DS

and I use "nsrxchsv.exe" in the "backup command" field rather than leaving
it blank.

Then I set up a second client setup with the same name, and all the local
save sets

C:\
D:\
SYSTEM STATE:\
SYSTEM DB:\
SYSTEM FILES:\

and I leave the backup command field blank. I also run them in different
backup windows, to avoid potential conflicts.

seems to work on exchange 5.5 anyway.

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU] On
Behalf Of Michael Brooks
Sent: Thursday, December 23, 2004 9:38 AM
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Subject: Re: MSEXCH Failing

in the "save set" field (we are a windows environment - unix may differ)
of the client, you need:
MSEXCH: for the databases, and
MSEXCH:MB for mailboxes

hope this gets you going again

michael brooks ........... michaelb < at > sequoiains.com
Network Administrator .... 831.657.4539 (phone)
Sequoia Insurance ........ 831.657.4512 (fax)

"Flying is learning how to throw yourself at the ground and miss"

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU]
On Behalf Of Tim Aitken
Sent: Wednesday, December 22, 2004 6:01 PM
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Subject: [Networker] MSEXCH Failing

Hello all,

Two days ago our backups on our Exchange 2003 server stopped working. We
have recently installed Exchange 2003 on a Windows 2003 box. The night
the first backup failed we were migrating our public folders from the
5.5 server to the new 2003 server. The 5.5 server wasn't being backed up
as we were using it's licence to backup the 2003 server (this had been
working for a about a week). I can successfully make a backup is I start
it from the client software on Exchange, it is the groups that is
failing.

This is the log of the attempted backup

Dec 23 12:37:48 backup_server: NetWorker savegroup: (info) starting
msexchange (with 1 client(s)) Dec 23 12:39:11 backup_server: NetWorker
savegroup: (alert) msexchange completed, total 1 client(s), 0
Hostname(s) Unresolved, 1 Failed, 0 Succeeded. (exch-s01 Failed)
Dec 23 12:39:11 backup_server: Start time: Thu Dec 23 12:37:47 2004
Dec 23 12:39:11 backup_server: End time: Thu Dec 23 12:39:11 2004
Dec 23 12:39:11 backup_server: --- Unsuccessful Save Sets --- Dec 23
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ 1 retry attempted Dec
23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ System Version:
5.2 Build 3790
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ ESEBCLI2.DLL
Version: 6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Performing an
Exchange save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Parsing
parameters from the command line Dec 23 12:39:11 backup_server: *
exch-s01:SYSTEM STATE:\ xchutil(996):
Invalid application name SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Error parsing
parameter: SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Backup
operation finished with errors.
Dec 23 12:39:11 qbackup_server: * exch-s01:MSEXCH:\ 1 retry attempted
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23
12:39:11 backup_server: * exch-s01:MSEXCH:\ System Version: 5.2 Build
3790 Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ ESEBCLI2.DLL
Version:
6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Performing an
Exchange save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Parsing parameters
from the command line Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\
xchutil(1184): Bad
argument(s)
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Error parsing
parameter:
MSEXCH:\
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Backup operation
finished with errors.
Dec 23 12:39:11 backup_server: --- Successful Save Sets ---
Dec 23 12:39:11 backup_server: backup_server: index:exch-s01
level=full,
19 KB 00:00:56 5 files

I hope i have included enough info for someone to point me in the right
direction because I haven't been able to find any info through google
that helps.

Thanks

Tim Aitken

Note: To sign off this list, send a "signoff networker" command via
view and post messages to the list. Questions regarding this list should
be sent to stan < at > temple.edu

Note: To sign off this list, send a "signoff networker" command via email
should be sent to stan < at > temple.edu


This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you are
not the intended recipient, you are strictly prohibited from disclosing,
copying, distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. Confidential,
proprietary or time-sensitive communications should not be transmitted via
the Internet, as there can be no assurance of actual or timely delivery,
receipt and/or confidentiality. This is not an offer, or solicitation of any
offer to buy or sell any security, investment or other product.

Note: To sign off this list, send a "signoff networker" command via email
should be sent to stan < at > temple.edu

when we upgraded to x2k3 we had to change the savesets and this is the
syntax legato had us use. i believe we also had the syntax you currently
have when we were backing up x5.5. the fact that your backups were
working after the initial upgrade and prior to migrating public folders
is somewhat troubling though.
=20

michael brooks ........... michaelb < at > sequoiains.com

Network Administrator .... 831.657.4539 (phone)

Sequoia Insurance ........ 831.657.4512 (fax)

"Flying is learning how to throw yourself at the ground and miss"

=20

________________________________

From: Dell, Mary [mailto:mdell < at > mesirowfinancial.com]=20
Sent: Thursday, December 23, 2004 12:54 PM
To: 'Legato NetWorker discussion'; Michael Brooks
Subject: RE: MSEXCH Failing




My setup on a unix server has the save sets as:=20

MSEXCH:IS=20
MSEXCH:DS=20

and I use "nsrxchsv.exe" in the "backup command" field rather than
leaving it blank.=20

Then I set up a second client setup with the same name, and all the
local save sets=20

C:\=20
D:\=20
SYSTEM STATE:\=20
SYSTEM DB:\=20
SYSTEM FILES:\=20

and I leave the backup command field blank. I also run them in
different backup windows, to avoid potential conflicts.=20

seems to work on exchange 5.5 anyway.=20

-----Original Message-----=20
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU]
On Behalf Of Michael Brooks=20
Sent: Thursday, December 23, 2004 9:38 AM=20
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU=20
Subject: Re: MSEXCH Failing=20

in the "save set" field (we are a windows environment - unix may differ)

of the client, you need:=20
MSEXCH: for the databases, and=20
MSEXCH:MB for mailboxes=20

hope this gets you going again=20

michael brooks ........... michaelb < at > sequoiains.com=20
Network Administrator .... 831.657.4539 (phone)=20
Sequoia Insurance ........ 831.657.4512 (fax)=20

"Flying is learning how to throw yourself at the ground and miss"=20

-----Original Message-----=20
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU]

On Behalf Of Tim Aitken=20
Sent: Wednesday, December 22, 2004 6:01 PM=20
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU=20
Subject: [Networker] MSEXCH Failing=20

Hello all,=20

Two days ago our backups on our Exchange 2003 server stopped working. We

have recently installed Exchange 2003 on a Windows 2003 box. The night=20
the first backup failed we were migrating our public folders from the=20
5.5 server to the new 2003 server. The 5.5 server wasn't being backed up

as we were using it's licence to backup the 2003 server (this had been=20
working for a about a week). I can successfully make a backup is I start

it from the client software on Exchange, it is the groups that is=20
failing.=20

This is the log of the attempted backup=20

Dec 23 12:37:48 backup_server: NetWorker savegroup: (info) starting=20
msexchange (with 1 client(s)) Dec 23 12:39:11 backup_server: NetWorker=20
savegroup: (alert) msexchange completed, total 1 client(s), 0=20
Hostname(s) Unresolved, 1 Failed, 0 Succeeded. (exch-s01 Failed)=20
Dec 23 12:39:11 backup_server: Start time: Thu Dec 23 12:37:47 2004=20
Dec 23 12:39:11 backup_server: End time: Thu Dec 23 12:39:11 2004=20
Dec 23 12:39:11 backup_server: --- Unsuccessful Save Sets --- Dec 23=20
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ 1 retry attempted Dec=20
23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ nsrxchsv_ese.exe=20
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23=20
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ System Version:=20
5.2 Build 3790=20
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ ESEBCLI2.DLL=20
Version: 6.5.6944.0=20
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Performing an=20
Exchange save operation; save level is Full (Legato Backup Level: full).

Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Parsing=20
parameters from the command line Dec 23 12:39:11 backup_server: *=20
exch-s01:SYSTEM STATE:\ xchutil(996):=20
Invalid application name SYSTEM STATE:\=20
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Error parsing=20
parameter: SYSTEM STATE:\=20
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Backup=20
operation finished with errors.=20
Dec 23 12:39:11 qbackup_server: * exch-s01:MSEXCH:\ 1 retry attempted=20
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ nsrxchsv_ese.exe=20
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23=20
12:39:11 backup_server: * exch-s01:MSEXCH:\ System Version: 5.2 Build=20
3790 Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ ESEBCLI2.DLL=20
Version:=20
6.5.6944.0=20
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Performing an=20
Exchange save operation; save level is Full (Legato Backup Level: full).

Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Parsing parameters=20
from the command line Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\

xchutil(1184): Bad=20
argument(s)=20
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Error parsing=20
parameter:=20
MSEXCH:\=20
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Backup operation=20
finished with errors.=20
Dec 23 12:39:11 backup_server: --- Successful Save Sets ---=20
Dec 23 12:39:11 backup_server: backup_server: index:exch-s01=20
level=3Dfull,=20
19 KB 00:00:56 5 files=20

I hope i have included enough info for someone to point me in the right=20
direction because I haven't been able to find any info through google=20
that helps.=20

Thanks=20

Tim Aitken=20

--=20
Note: To sign off this list, send a "signoff networker" command via=20
view and post messages to the list. Questions regarding this list should

be sent to stan < at > temple.edu=20
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=
*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=20

--=20
Note: To sign off this list, send a "signoff networker" command via
email=20
should be sent to stan < at > temple.edu=20
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=
*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=20


This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. Confidential, proprietary or time-sensitive communications
should not be transmitted via the Internet, as there can be no assurance
of actual or timely delivery, receipt and/or confidentiality. This is
not an offer, or solicitation of any offer to buy or sell any security,
investment or other product.


Note: To sign off this list, send a "signoff networker" command via email
should be sent to stan < at > temple.edu
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D