Backup Central

Probably your \\.\TapeX logical device names do not match the physical
order of the devices in the jukebox.
Run the inventory command. It should list the S/N for each drive.
Then run the command sjisn scsidev < at > b.t.l where the b.t.l are the address
listed in the inquire for the jukebox.
The sjisn command will list the drives with their S/N by their physical
position in the jukebox.

Make sure that the logical matches the physical...

HTH,
Itzik

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU]
On Behalf Of Raquel Nava
Sent: Thursday, July 22, 2004 16:47
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Subject: [Networker] Problem - NW 7.0 working Silo Storagetek 9310


Hi there,

I'm trying configure my backup environment:

NetWorker Server 7.0
Windows Srv Adv 2000
FC Qlogic QLA23XX
Silo STK 9310 Powderhorn
4 drivers 9840
ACSLS 6.1.1
LibAttach 1.1


Licenses for NW 7.0, Silo Module, DDS and Dedicated SN, are OK !

I installed my NW Server, used jbconfig, my "autochanger" was
configured.

Seemingly, all rigth.

But when I try to mount / umount / inventory or label my 'volumes', the
NW
not work properly. To return this error:

Jul 21 16:17:22 wtrjo007: attribute in the device resource.
Jul 21 16:17:22 wtrjo007: NetWorker media: (warning) \\.\Tape1 reading:
read
open error: drive status is The drive is not ready and the reason is not
known
Jul 21 16:17:23 wtrjo007: NetWorker media: (info) Library `CLU6000'
resource
is out of sync: attempting to adjust drive `\\.\Tape1' status to: loaded
with volume from slot unknowm
Jul 21 16:50:03 wtrjo007: NetWorker media: (warning) \\.\Tape2 opening:
DRIVE_STATUS_NOT_READY_UNK
Jul 21 16:50:03 wtrjo007: NetWorker device disabled: (warning) Device
\\.\Tape2 is automatically disabled.


I don't know what's happening !

Anyone help me ?

Sorry my english, it's same my "NetWorker" =3D don't work properly !

:o)

Thank's for all.

Raquel

Note: To sign off this list, send a "signoff networker" command via
email
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=
*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D

*************************************************************************=
*************************
The contents of this email and any attachments are confidential.
It is intended for the named recipient(s) only.
If you have received this email in error please notify the system manager=
or the=20
sender immediately and do not disclose the contents to any one or make co=
pies.

MBI - System Team
*************************************************************************=
*************************

Note: To sign off this list, send a "signoff networker" command via email
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D

Raquel,

Networker 7 has a new feature called CDI ( a new way to talk to scsi devices
a ) sometimes I found that extra translation by CDI created strangs
errormessages.

you could try to switch it off in the GUI:

Devices -> (device name) -> Edit -> Configuration -> CDI

change it to NOT USED and try again

hope fully the error message becomes more relevant that way.

Maarten

On Thursday 22 July 2004 15:46, Raquel Nava wrote:
Hi there,

I'm trying configure my backup environment:

NetWorker Server 7.0
Windows Srv Adv 2000
FC Qlogic QLA23XX
Silo STK 9310 Powderhorn
4 drivers 9840
ACSLS 6.1.1
LibAttach 1.1


Licenses for NW 7.0, Silo Module, DDS and Dedicated SN, are OK !

I installed my NW Server, used jbconfig, my "autochanger" was configured.

Seemingly, all rigth.

But when I try to mount / umount / inventory or label my 'volumes', the NW
not work properly. To return this error:

Jul 21 16:17:22 wtrjo007: attribute in the device resource.
Jul 21 16:17:22 wtrjo007: NetWorker media: (warning) \\.\Tape1 reading:
read open error: drive status is The drive is not ready and the reason is
not known
Jul 21 16:17:23 wtrjo007: NetWorker media: (info) Library `CLU6000'
resource is out of sync: attempting to adjust drive `\\.\Tape1' status to:
loaded with volume from slot unknowm
Jul 21 16:50:03 wtrjo007: NetWorker media: (warning) \\.\Tape2 opening:
DRIVE_STATUS_NOT_READY_UNK
Jul 21 16:50:03 wtrjo007: NetWorker device disabled: (warning) Device
\\.\Tape2 is automatically disabled.


I don't know what's happening !

Anyone help me ?

Sorry my english, it's same my "NetWorker" = don't work properly !

:o)

Thank's for all.

Raquel

--
Note: To sign off this list, send a "signoff networker" command via email

Maarten Boot,
Compuware Europe B.V.
Hoogoorddreef 5
1101 BA Amsterdam

Note: To sign off this list, send a "signoff networker" command via email

Hi there,

I'm trying configure my backup environment:

NetWorker Server 7.0
Windows Srv Adv 2000
FC Qlogic QLA23XX
Silo STK 9310 Powderhorn
4 drivers 9840
ACSLS 6.1.1
LibAttach 1.1


Licenses for NW 7.0, Silo Module, DDS and Dedicated SN, are OK !

I installed my NW Server, used jbconfig, my "autochanger" was configured.

Seemingly, all rigth.

But when I try to mount / umount / inventory or label my 'volumes', the NW
not work properly. To return this error:

Jul 21 16:17:22 wtrjo007: attribute in the device resource.
Jul 21 16:17:22 wtrjo007: NetWorker media: (warning) \\.\Tape1 reading: read
open error: drive status is The drive is not ready and the reason is not
known
Jul 21 16:17:23 wtrjo007: NetWorker media: (info) Library `CLU6000' resource
is out of sync: attempting to adjust drive `\\.\Tape1' status to: loaded
with volume from slot unknowm
Jul 21 16:50:03 wtrjo007: NetWorker media: (warning) \\.\Tape2 opening:
DRIVE_STATUS_NOT_READY_UNK
Jul 21 16:50:03 wtrjo007: NetWorker device disabled: (warning) Device
\\.\Tape2 is automatically disabled.


I don't know what's happening !

Anyone help me ?

Sorry my english, it's same my "NetWorker" = don't work properly !

:o)

Thank's for all.

Raquel

Note: To sign off this list, send a "signoff networker" command via email

You may need to contact Legato. I ran into problems with 7.1.1 and ACSLS
6.0.1. You will likely need to replace a couple Legato modules to work
correctly with ACSLS.

-----Original Message-----
From: Legato NetWorker discussion
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Sent: 7/22/04 8:46 AM
Subject: [Networker] Problem - NW 7.0 working Silo Storagetek 9310

Hi there,

I'm trying configure my backup environment:

NetWorker Server 7.0
Windows Srv Adv 2000
FC Qlogic QLA23XX
Silo STK 9310 Powderhorn
4 drivers 9840
ACSLS 6.1.1
LibAttach 1.1


Licenses for NW 7.0, Silo Module, DDS and Dedicated SN, are OK !

I installed my NW Server, used jbconfig, my "autochanger" was
configured.

Seemingly, all rigth.

But when I try to mount / umount / inventory or label my 'volumes', the
NW
not work properly. To return this error:

Jul 21 16:17:22 wtrjo007: attribute in the device resource.
Jul 21 16:17:22 wtrjo007: NetWorker media: (warning) \\.\Tape1 reading:
read
open error: drive status is The drive is not ready and the reason is not
known
Jul 21 16:17:23 wtrjo007: NetWorker media: (info) Library `CLU6000'
resource
is out of sync: attempting to adjust drive `\\.\Tape1' status to: loaded
with volume from slot unknowm
Jul 21 16:50:03 wtrjo007: NetWorker media: (warning) \\.\Tape2 opening:
DRIVE_STATUS_NOT_READY_UNK
Jul 21 16:50:03 wtrjo007: NetWorker device disabled: (warning) Device
\\.\Tape2 is automatically disabled.


I don't know what's happening !

Anyone help me ?

Sorry my english, it's same my "NetWorker" = don't work properly !

:o)

Thank's for all.

Raquel

Note: To sign off this list, send a "signoff networker" command via
email

Note: To sign off this list, send a "signoff networker" command via email

Hi Dale,

thank's for your reply.

But in Legato NetWorker 7.x Hardware Compatibility Guide, it's support.

:o/




Raquel,

I do not believe that ACSLS 6.x supports NetWorker 7.x

HTH...Dale

Note: To sign off this list, send a "signoff networker" command via email