Networker will eject volumes from drives automatically
only and only of the jukebox is shared accross
different storage nodes (static or dynamic lib sharing).
If the robot is NOT shared (all drives managed by the node
handling the robotic arm), vols will NOT be ejected.
To work around that, schedule a=20
nsrjb -uvs <server> [-J <jbox name>]
on the node handling the robotic arm=20
if the jukebox is served by a storage node,
nsrjb -uv [-J <jbox name>]
on the backup server
if the server is operating the robotic arm.
Only loaded devices with completed I/O operation
( I mean in "reading, done" or "writing, done" state)
will be ejected.
HTH,
TH
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
=20
********* ********* HEWLETT - PACKARD
******* h ******* 1 Rue de l'aeronef/Luchtschipstraat
****** h ****** 1140 Bruxelles/Brussel/Brussels
***** hhhh pppp ***** =20
***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
****** p ****** BELGIUM
******* p ******* =20
********* ********* Phone : +32 (0)2 / 729.85.42 =20
Mobile : +32 (0)498/ 94.60.85=20
Fax : +32 (0)2 / 729.88.30 =20
I N V E N T Email/MSN : thierry.faidherbe < at > hp.com
Internet :
http://www.hp.com/=20
________________________________________________________________________
MOBISTAR SA/NV=20
CSO/CTO/CEO/SSD/SBI
SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2 / 745.75.81 =20
Avenue Jean Mermoz, 32 Fax : +32 (0)2 / 745.89.56 =20
6041 GOSSELIES Email : tfhaidhe < at > mail.mobistar.be
BELGIUM Web :
http://www.mobistar.be/
________________________________________________________________________
=20
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER < at > LISTMAIL.TEMPLE.EDU]
On Behalf Of Kwon Sang Deuk
Sent: Wednesday, September 22, 2004 5:58 PM
To: NETWORKER < at > LISTMAIL.TEMPLE.EDU
Subject: [Networker] what can i use device's components to umount used
tape instantly when job is complete
I don't know it that how to umount used tape for backing up data after
job
is complete.
you can show environment of test
Backup Tape : AIT-3
Tape Drive : AIT-3 drive
NetWorker Version : 6.1.4 for W2K
Backup Group : Default1
Client : 1 ea
After Default1 Group is end . The used tape for Backing up Data is
mounted
in AIT-3 drive. but i wanna to umount Tape from drive automatically .
I only know that the method of umount order by manually. the operation
is
nsrjb -HEv.
What is the other method for umount tape automaitically when job is end
?
wait your response ....
Note: To sign off this list, send a "signoff networker" command via
email
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D=
*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D
Note: To sign off this list, send a "signoff networker" command via email
=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D*=3D
