Dear :
We had try to use the following commands to checkout or checkin the tapes to
the I/O station. There is not errors occurs, it just did not move the
checkout tape to the TS3200 I/O station or move the checkin tape from I/O
station to other tape slot.
checkin libvol ts3200 seach=bulk status=scratch checklabel=barcode
checkout libvol ts3200 &vol remove=bulk checklabel=yes
Best regards,
Victor Shum
-----邮件原件-----
发件人: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] 代表 Steven
Langdale
发送时间: 2012年7月26日 20:21
收件人: ADSM-L < at > VM.MARIST.EDU
主题: Re: [ADSM-L] TSM V6.3 with IBM TS3200 I/O stations issue
Hello
What are you trying and what errors/messages are you getting?
On Jul 26, 2012 1:06 PM, "Victor Shum" <victorshum < at > cadex.com.hk> wrote:
Dear all :
We were trying to use the TS-3200 I/O station to handle checkin and
checkout of tape. After we change the TS3200 library to enable I/O
station; then reboot the tape library and restart the TSM server. We
still cannot checkout any tape to the I/O station.
Anyone has idea how to trace where is the problems or anything I had
missed.
Best regards,
Victor Shum
