Backup Central

The goal: delete a storage pool.

I've migrated a storage pool to a new pool.

Three volumes remain in the pool, such as H:\ DSKT07P\000011BF.BFS, which disallow the delete.

% Util on them is 0; status is full.

Q CONTENT H:\DSKT07P\000011BF.BFS returns ANR2034E QUERY CONTENT: No match found using this criteria.

Same result for the other two volumes.

Q CONTENT <volumename> against the new pool does display files.

I believe that means the volumes on the old pool are in fact empty and I can delete them individually.

Correct?


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services
Harold.Vandeventer < at > da.ks.gov<mailto:Dane.Woodring < at > da.ks.gov>
(785) 296-0631

Check out "delete volume" for possible causes here:
http://people.bu.edu/rbs/ADSM.QuickFacts

Regards,
Shawn
________________________________________________
Shawn Drew





Internet
Harold.Vandeventer < at > DA.KS.GOV

Sent by: ADSM-L < at > VM.MARIST.EDU
01/20/2012 02:07 PM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L
cc

Subject
[ADSM-L] Deleting STG POOL






The goal: delete a storage pool.

I've migrated a storage pool to a new pool.

Three volumes remain in the pool, such as H:\ DSKT07P\000011BF.BFS, which
disallow the delete.

% Util on them is 0; status is full.

Q CONTENT H:\DSKT07P\000011BF.BFS returns ANR2034E QUERY CONTENT: No match
found using this criteria.

Same result for the other two volumes.

Q CONTENT <volumename> against the new pool does display files.

I believe that means the volumes on the old pool are in fact empty and I
can delete them individually.

Correct?


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information
Technology Services
Harold.Vandeventer < at > da.ks.gov<mailto:Dane.Woodring < at > da.ks.gov>
(785) 296-0631



This message and any attachments (the "message") is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that certain
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

Eventhough they don't show any content, you could always do a "delete
volume ... discarddata=yes" for each volume.



From: "Vandeventer, Harold [BS]" <Harold.Vandeventer < at > DA.KS.GOV>
To: ADSM-L < at > VM.MARIST.EDU
Date: 01/20/2012 02:17 PM
Subject: [ADSM-L] Deleting STG POOL
Sent by: "ADSM: Dist Stor Manager" <ADSM-L < at > VM.MARIST.EDU>



The goal: delete a storage pool.

I've migrated a storage pool to a new pool.

Three volumes remain in the pool, such as H:\ DSKT07P\000011BF.BFS, which
disallow the delete.

% Util on them is 0; status is full.

Q CONTENT H:\DSKT07P\000011BF.BFS returns ANR2034E QUERY CONTENT: No match
found using this criteria.

Same result for the other two volumes.

Q CONTENT <volumename> against the new pool does display files.

I believe that means the volumes on the old pool are in fact empty and I
can delete them individually.

Correct?


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information
Technology Services
Harold.Vandeventer < at > da.ks.gov<mailto:Dane.Woodring < at > da.ks.gov>
(785) 296-0631

I'm confident they're empty; just trying to prove it before I delete.

CONTENT isn't providing anything, and I can display content of volumes in other pools.

Q VOL <name> FORMAT=DETAILED indicates
Pct Util =0
Volume status =Full
Pct reclaimable space = 100
Not in error state

DEL VOL <name> DISCARD=NO should be a safe command. If the volume contains files, the volume will not be deleted.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Zoltan Forray/AC/VCU
Sent: Friday, January 20, 2012 1:47 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] Deleting STG POOL

Eventhough they don't show any content, you could always do a "delete
volume ... discarddata=yes" for each volume.



From: "Vandeventer, Harold [BS]" <Harold.Vandeventer < at > DA.KS.GOV>
To: ADSM-L < at > VM.MARIST.EDU
Date: 01/20/2012 02:17 PM
Subject: [ADSM-L] Deleting STG POOL
Sent by: "ADSM: Dist Stor Manager" <ADSM-L < at > VM.MARIST.EDU>



The goal: delete a storage pool.

I've migrated a storage pool to a new pool.

Three volumes remain in the pool, such as H:\ DSKT07P\000011BF.BFS, which
disallow the delete.

% Util on them is 0; status is full.

Q CONTENT H:\DSKT07P\000011BF.BFS returns ANR2034E QUERY CONTENT: No match
found using this criteria.

Same result for the other two volumes.

Q CONTENT <volumename> against the new pool does display files.

I believe that means the volumes on the old pool are in fact empty and I
can delete them individually.

Correct?


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information
Technology Services
Harold.Vandeventer < at > da.ks.gov<mailto:Dane.Woodring < at > da.ks.gov>
(785) 296-0631

Try running an audit volume on each of the volumes.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Vandeventer, Harold [BS]
Sent: Friday, January 20, 2012 12:50 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Deleting STG POOL

I'm confident they're empty; just trying to prove it before I delete.

CONTENT isn't providing anything, and I can display content of volumes in other pools.

Q VOL <name> FORMAT=DETAILED indicates
Pct Util =0
Volume status =Full
Pct reclaimable space = 100
Not in error state

DEL VOL <name> DISCARD=NO should be a safe command. If the volume contains files, the volume will not be deleted.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Zoltan Forray/AC/VCU
Sent: Friday, January 20, 2012 1:47 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] Deleting STG POOL

Eventhough they don't show any content, you could always do a "delete volume ... discarddata=yes" for each volume.



From: "Vandeventer, Harold [BS]" <Harold.Vandeventer < at > DA.KS.GOV>
To: ADSM-L < at > VM.MARIST.EDU
Date: 01/20/2012 02:17 PM
Subject: [ADSM-L] Deleting STG POOL
Sent by: "ADSM: Dist Stor Manager" <ADSM-L < at > VM.MARIST.EDU>



The goal: delete a storage pool.

I've migrated a storage pool to a new pool.

Three volumes remain in the pool, such as H:\ DSKT07P\000011BF.BFS, which disallow the delete.

% Util on them is 0; status is full.

Q CONTENT H:\DSKT07P\000011BF.BFS returns ANR2034E QUERY CONTENT: No match found using this criteria.

Same result for the other two volumes.

Q CONTENT <volumename> against the new pool does display files.

I believe that means the volumes on the old pool are in fact empty and I can delete them individually.

Correct?


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services Harold.Vandeventer < at > da.ks.gov<mailto:Dane.Woodring < at > da.ks.gov>
(785) 296-0631

make the volume read-only     upd vol xxxxx  acc=reado

run a move data        move data xxxxxx

take the volume offline       vary offline    xxxxxxx

delete the volume             del vol    xxxxxxx


 
Jerry Michalak
jerry_gjm < at > yahoo.com


________________________________
From: "Thorneycroft, Doug" <dthorneycroft < at > LACSD.ORG>
To: ADSM-L < at > VM.MARIST.EDU
Sent: Friday, January 20, 2012 3:33 PM
Subject: Re: [ADSM-L] Deleting STG POOL

Try running an audit volume on each of the volumes.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Vandeventer, Harold [BS]
Sent: Friday, January 20, 2012 12:50 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Deleting STG POOL

I'm confident they're empty; just trying to prove it before I delete.

CONTENT isn't providing anything, and I can display content of volumes in other pools.

Q VOL <name> FORMAT=DETAILED indicates
    Pct Util =0
    Volume status =Full
    Pct reclaimable space = 100
    Not in error state

DEL VOL <name> DISCARD=NO should be a safe command.  If the volume contains files, the volume will not be deleted.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Zoltan Forray/AC/VCU
Sent: Friday, January 20, 2012 1:47 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] Deleting STG POOL

Eventhough they don't show any content, you could always do a "delete volume ... discarddata=yes" for each volume.



From:  "Vandeventer, Harold [BS]" <Harold.Vandeventer < at > DA.KS.GOV>
To:    ADSM-L < at > VM.MARIST.EDU
Date:  01/20/2012 02:17 PM
Subject:        [ADSM-L] Deleting STG POOL
Sent by:        "ADSM: Dist Stor Manager" <ADSM-L < at > VM.MARIST.EDU>



The goal: delete a storage pool.

I've migrated a storage pool to a new pool.

Three volumes remain in the pool, such as H:\ DSKT07P\000011BF.BFS, which disallow the delete.

% Util on them is 0; status is full.

Q CONTENT H:\DSKT07P\000011BF.BFS returns ANR2034E QUERY CONTENT: No match found using this criteria.

Same result for the other two volumes.

Q CONTENT <volumename> against the new pool does display files.

I believe that means the volumes on the old pool are in fact empty and I can delete them individually.

Correct?


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services Harold.Vandeventer < at > da.ks.gov<mailto:Dane.Woodring < at > da.ks.gov>
(785) 296-0631

On 01/20/2012 03:50 PM, Vandeventer, Harold [BS] wrote:
I'm confident they're empty; just trying to prove it before I delete.

CONTENT isn't providing anything, and I can display content of volumes in other pools.


Are they PENDING?

- Allen S. Rout

Thanks to everyone for the continued suggestions.

The DEL VOL <volname> DISCARD=NO was successful, deleted the volumes without any issues.

I had tried various reclaim/migrate tasks, Q CONTENT, etc; everything implied they were empty.

It boils down to why didn't the volumes get deleted when the initial reclaim processes ran.

Thanks again for all the suggestions.


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Allen S. Rout
Sent: Monday, January 23, 2012 11:25 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] Deleting STG POOL

On 01/20/2012 03:50 PM, Vandeventer, Harold [BS] wrote:
I'm confident they're empty; just trying to prove it before I delete.

CONTENT isn't providing anything, and I can display content of volumes in other pools.


Are they PENDING?

- Allen S. Rout

I used to do an "audit vol <volname> fix=yes" to clear the pointers to no longer avail data. Think it was a now issues.


-----Oorspronkelijk bericht-----
Van: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] Namens Vandeventer, Harold [BS]
Verzonden: maandag 23 januari 2012 19:03
Aan: ADSM-L < at > VM.MARIST.EDU
Onderwerp: Re: Deleting STG POOL

Thanks to everyone for the continued suggestions.

The DEL VOL <volname> DISCARD=NO was successful, deleted the volumes without any issues.

I had tried various reclaim/migrate tasks, Q CONTENT, etc; everything implied they were empty.

It boils down to why didn't the volumes get deleted when the initial reclaim processes ran.

Thanks again for all the suggestions.


------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration - Office of Information Technology Services Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Allen S. Rout
Sent: Monday, January 23, 2012 11:25 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] Deleting STG POOL

On 01/20/2012 03:50 PM, Vandeventer, Harold [BS] wrote:
I'm confident they're empty; just trying to prove it before I delete.

CONTENT isn't providing anything, and I can display content of volumes in other pools.


Are they PENDING?

- Allen S. Rout






Dit bericht is vertrouwelijk en kan geheime informatie bevatten enkel bestemd voor de geadresseerde. Indien dit bericht niet voor u is bestemd, verzoeken wij u dit onmiddellijk aan ons te melden en het bericht te vernietigen. Aangezien de integriteit van het bericht niet veilig gesteld is middels verzending via internet, kan Atos Nederland B.V. niet aansprakelijk worden gehouden voor de inhoud daarvan. Hoewel wij ons inspannen een virusvrij netwerk te hanteren, geven wij geen enkele garantie dat dit bericht virusvrij is, noch aanvaarden wij enige aansprakelijkheid voor de mogelijke aanwezigheid van een virus in dit bericht. Op al onze rechtsverhoudingen, aanbiedingen en overeenkomsten waaronder Atos Nederland B.V. goederen en/of diensten levert zijn met uitsluiting van alle andere voorwaarden de Leveringsvoorwaarden van Atos Nederland B.V. van toepassing. Deze worden u op aanvraag direct kosteloos toegezonden.

This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Atos Nederland B.V. group liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. On all offers and agreements under which Atos Nederland B.V. supplies goods and/or services of whatever nature, the Terms of Delivery from Atos Nederland B.V. exclusively apply. The Terms of Delivery shall be promptly submitted to you on your request.

Atos Nederland B.V. / Utrecht
KvK Utrecht 30132762