Backup Central

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

Hi David,

You can :
- lock the node,
- put an expire date for the sched wich is yesterday (today-1), if the node is the only one using this sched,
- delete association, if it's'definitive.

Choose one.
--
Best regards / Cordialement / مع تحياتي
Erwann SIMON

-----Original Message-----
From: "Tyree, David" <david.tyree < at > SGMC.ORG>
Sender: "ADSM: Dist Stor Manager" <ADSM-L < at > VM.MARIST.EDU>
Date: Wed, 14 Dec 2011 13:04:33
To: <ADSM-L < at > VM.MARIST.EDU>
Reply-To: "ADSM: Dist Stor Manager" <ADSM-L < at > VM.MARIST.EDU>
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

How about DISABLE SESSIONS?

That would not stop schedules, but would disallow the node connection.

Still allows mgmt access, doesn't require an edit to opt nor a restart.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration/COMPACT
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Lee, Gary D.
Sent: Wednesday, December 14, 2011 12:23 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

Have you looked at the "disable sessions" command?

George
x7911 (office)

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Lee, Gary D.
Sent: Wednesday, December 14, 2011 1:23 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

IMPORTANT: The security of electronic mail sent through the Internet is not guaranteed. Legg Mason therefore recommends that you do not send confidential information to us via electronic mail, including social security numbers, account numbers, and personal identification numbers. Delivery, and timely delivery, of electronic mail is also not guaranteed. Legg Mason therefore recommends that you do not send time-sensitive or action-oriented messages to us via electronic mail, including authorization to "buy" or "sell" a security or instructions to conduct any other financial transaction. Such requests, orders or instructions will not be processed until Legg Mason can confirm your instructions or obtain appropriate written documentation where necessary.

I have about a dozen schedules but I would like to be able deactivate a couple of them and not affect the others.


David Tyree 
Interface Analyst 
South Georgia Medical Center
229.333.1155


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Vandeventer, Harold [BS]
Sent: Wednesday, December 14, 2011 1:29 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

How about DISABLE SESSIONS?

That would not stop schedules, but would disallow the node connection.

Still allows mgmt access, doesn't require an edit to opt nor a restart.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration/COMPACT
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Lee, Gary D.
Sent: Wednesday, December 14, 2011 12:23 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

You could update the start date or expiration date.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Lee, Gary D.
Sent: Wednesday, December 14, 2011 10:23 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: disabe/enable a sched via command line

The closest thing I can come up with is Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

Can you change the Start Date/time to a future date on the schedules you
don't want to run.
----- Original Message -----
From: "Tyree, David" <david.tyree < at > SGMC.ORG>
To: <ADSM-L < at > VM.MARIST.EDU>
Sent: Wednesday, December 14, 2011 2:05 PM
Subject: Re: [ADSM-L] disabe/enable a sched via command line


I have about a dozen schedules but I would like to be able deactivate a
couple of them and not affect the others.


David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Vandeventer, Harold [BS]
Sent: Wednesday, December 14, 2011 1:29 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

How about DISABLE SESSIONS?

That would not stop schedules, but would disallow the node connection.

Still allows mgmt access, doesn't require an edit to opt nor a restart.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration/COMPACT
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Lee, Gary D.
Sent: Wednesday, December 14, 2011 12:23 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the
tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client
schedules from the command line. I've looked over the online help and
elsewhere but no luck.

If the command was for an admin sched I would do "update
sched something type=admin active=yes/no" . But I don't see a similar
command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

Here's a link with an example that you could check out..

http://momo66.wordpress.com/2007/06/25/remove-client-node-from-a-schedule/

** Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you reply with your password, social
security number or confidential personal information. For more details
visit http://infosecurity.vcu.edu/phishing.html



From: "Tyree, David" <david.tyree < at > SGMC.ORG>
To: ADSM-L < at > VM.MARIST.EDU
Date: 12/14/2011 02:18 PM
Subject: Re: [ADSM-L] disabe/enable a sched via command line
Sent by: "ADSM: Dist Stor Manager" <ADSM-L < at > VM.MARIST.EDU>



I have about a dozen schedules but I would like to be able deactivate a
couple of them and not affect the others.


David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Vandeventer, Harold [BS]
Sent: Wednesday, December 14, 2011 1:29 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

How about DISABLE SESSIONS?

That would not stop schedules, but would disallow the node connection.

Still allows mgmt access, doesn't require an edit to opt nor a restart.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration/COMPACT
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Lee, Gary D.
Sent: Wednesday, December 14, 2011 12:23 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the
tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client
schedules from the command line. I've looked over the online help and
elsewhere but no luck.

If the command was for an admin sched I would do "update
sched something type=admin active=yes/no" . But I don't see a similar
command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

In TSM you define a schedule and then "associate" the nodes to 1 or more schedules using the "define assoc" command.

To stop a backup for a node, look at the "delete assoc" command and then later you can restart it using "define assoc".


 
Jerry Michalak
jerry_gjm < at > yahoo.com


________________________________
From: "Tyree, David" <david.tyree < at > SGMC.ORG>
To: ADSM-L < at > VM.MARIST.EDU
Sent: Wednesday, December 14, 2011 12:04 PM
Subject: [ADSM-L] disabe/enable a sched via command line

                I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

                If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
                thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

Delete association domain_name schedule_name node_name

Subsubstitute as appropriate.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 2:06 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

I have about a dozen schedules but I would like to be able deactivate a couple of them and not affect the others.


David Tyree 
Interface Analyst 
South Georgia Medical Center
229.333.1155


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Vandeventer, Harold [BS]
Sent: Wednesday, December 14, 2011 1:29 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

How about DISABLE SESSIONS?

That would not stop schedules, but would disallow the node connection.

Still allows mgmt access, doesn't require an edit to opt nor a restart.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration/COMPACT
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Lee, Gary D.
Sent: Wednesday, December 14, 2011 12:23 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

Occasionally on a friday we'd get a request to skip some backups over the
weekend. If you set the start date for the schedule to Monday's date, you
accomplish no backups running over the weekend, and you don't have to
remember to do anything on Monday to get the schedule working again.

If you want to stop backups for a day, you could do something like "update
schedule domain_name schedule_name STARTDate=today+1"?

Thanks,
[RC]





david.tyree < at > SGMC.ORG
Sent by: ADSM-L < at > VM.MARIST.EDU
12/14/2011 10:22 AM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L < at > VM.MARIST.EDU
cc

Subject
[ADSM-L] disabe/enable a sched via command line






I'm trying to figure out to enable and disable client
schedules from the command line. I've looked over the online help and
elsewhere but no luck.

If the command was for an admin sched I would do "update
sched something type=admin active=yes/no" . But I don't see a similar
command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155



If you are not the intended addressee, please inform us immediately that you have received this e-mail in error, and delete it. We thank you for your cooperation. =

If you change the "period units" to "onetime", the start date will have been passed and the schedule will not start until you change it back to a recurring unit. The Period will also change to 0 when onetime is selected, so the reversal will have to set both back to their original values.

Bob.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Jeannie Bruno
Sent: Wednesday, December 14, 2011 1:22 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

Can you change the Start Date/time to a future date on the schedules you
don't want to run.
----- Original Message -----
From: "Tyree, David" <david.tyree < at > SGMC.ORG>
To: <ADSM-L < at > VM.MARIST.EDU>
Sent: Wednesday, December 14, 2011 2:05 PM
Subject: Re: [ADSM-L] disabe/enable a sched via command line


I have about a dozen schedules but I would like to be able deactivate a
couple of them and not affect the others.


David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Vandeventer, Harold [BS]
Sent: Wednesday, December 14, 2011 1:29 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

How about DISABLE SESSIONS?

That would not stop schedules, but would disallow the node connection.

Still allows mgmt access, doesn't require an edit to opt nor a restart.

------------------------------------------------
Harold Vandeventer
Systems Programmer
State of Kansas - Department of Administration/COMPACT
Harold.Vandeventer < at > da.ks.gov
(785) 296-0631


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Lee, Gary D.
Sent: Wednesday, December 14, 2011 12:23 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: [ADSM-L] disabe/enable a sched via command line

The closest thing I can come up with is
Disable server

But this prevents all client connections.

To disable schedules, add the line

Disablescheds yes

To the dsmserv.opt file, then restart the server.

When you want to restart schedules, comment out the line, and restart the
tsm server again.




Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client
schedules from the command line. I've looked over the online help and
elsewhere but no luck.

If the command was for an admin sched I would do "update
sched something type=admin active=yes/no" . But I don't see a similar
command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155
This electronic transmission and any documents accompanying this electronic transmission contain confidential information belonging to the sender. This information may be legally privileged. The information is intended only for the use of the individual or entity named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on or regarding the contents of this electronically transmitted information is strictly prohibited.

David,

Try setting the expiration of the schedule to a prior day. i.e. upd sched DOMAIN 0100 exp=12/11/2011

Then when you want the schedule "reactivated" set back to "NEVER"

upd sched NOARCHIVE 0100 exp=Never

Not sure if this will do what you want but its worth testing.

Daniel Fiske

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line


I'm trying to figure out to enable and disable client schedules from the command line. I've looked over the online help and elsewhere but no luck.

If the command was for an admin sched I would do "update sched something type=admin active=yes/no" . But I don't see a similar command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155

Be aware that altering a client schedule will remove all historical
events from the DB.

Meaning when you perform an update to a client schedule and query the
past status for a particular client you will get the infamous "no match
found".


~Rick Adamson
Jacksonville, FL.


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Tyree, David
Sent: Wednesday, December 14, 2011 1:05 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: [ADSM-L] disabe/enable a sched via command line

I'm trying to figure out to enable and disable client
schedules from the command line. I've looked over the online help and
elsewhere but no luck.

If the command was for an admin sched I would do "update
sched something type=admin active=yes/no" . But I don't see a similar
command for client schedules.
thanks
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155