Backup Central

I am trying to generate a backup set for a Windows box and I am getting the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class retention=nolimit scratch=yes description=govsrv3X1forever
ANR1112W GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table of
contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance

f.y.i= the following does not work either

generate backupset Govsrv3x1 1 devclass=lto3class scratch=yes retention=nolimit nametype=FSID
tsm: TSMCOREX>tsm: TSMCORE2>generate backupset govsrv3x1 devclass=lto3class scratch=yes retention=nolimit nametype=FSID
ANR2022E GENERATE BACKUPSET: One or more parameters are missing.
ANS8001I Return code 3.



From: Hughes, Timothy
Sent: Wednesday, January 18, 2012 10:06 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Generate backupset error issue


I am trying to generate a backup set for a Windows box and I am getting the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class retention=nolimit scratch=yes description=govsrv3X1forever
ANR1112W GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table of
contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance

Tim,

Look at the TOCMGmtclass parameter of the 'generate backupset' command.

Jim Schneider

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > vm.marist.edu] On Behalf Of
Hughes, Timothy
Sent: Wednesday, January 18, 2012 9:06 AM
To: ADSM-L < at > vm.marist.edu
Subject: [ADSM-L] Generate backupset error issue

I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever ANR1112W
GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table
of contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance

Look at the copygroup for the node you are trying to create a backupset
for. The error is indicating that the value for "TOC destination" is
empty or invalid. The backupset will still be created, but there won't be
any table of contents. You need to point that to a storage pool. a fast
disk-based one is preferable. (This will need to be read when you browse
the backupset's files in the future)

run "help generate backupset" and go through each parameter. (Your next
email is missing the "backup_set_name_prefix" I think)

Regards,
Shawn
________________________________________________
Shawn Drew





Internet
Timothy.Hughes < at > OIT.STATE.NJ.US

Sent by: ADSM-L < at > VM.MARIST.EDU
01/18/2012 10:06 AM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L
cc

Subject
[ADSM-L] Generate backupset error issue






I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever
ANR1112W GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table of
contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance



This message and any attachments (the "message") is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that certain
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

Thanks shaw,

These are emergency backupsets we are running because we can't lose any data, so were not looking to do a TOC for them now. I just need to create them for several servers.


Thanks, yes the backup_set_name_prefix was missing from the command. I finally got the command (below) however the backup set failed

Generate backupset govsrv3x1 Boveofront31Bkup devclass=lto3class scratch=yes retention=nolimit (SESSION: 1304679)

ANR3503E Generation of backup set for GOVSRV3X1 asBoveofront31Bkup.709804709 (data type File) failed.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Shawn Drew
Sent: Wednesday, January 18, 2012 11:01 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

Look at the copygroup for the node you are trying to create a backupset
for. The error is indicating that the value for "TOC destination" is
empty or invalid. The backupset will still be created, but there won't be
any table of contents. You need to point that to a storage pool. a fast
disk-based one is preferable. (This will need to be read when you browse
the backupset's files in the future)

run "help generate backupset" and go through each parameter. (Your next
email is missing the "backup_set_name_prefix" I think)

Regards,
Shawn
________________________________________________
Shawn Drew





Internet
Timothy.Hughes < at > OIT.STATE.NJ.US

Sent by: ADSM-L < at > VM.MARIST.EDU
01/18/2012 10:06 AM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L
cc

Subject
[ADSM-L] Generate backupset error issue






I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever
ANR1112W GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table of
contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance



This message and any attachments (the "message") is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that certain
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

Tim,

The TSM output you posted ended with:
ANS8003I Process number 39922 started.

It looks like it's working. Did you get a subsequent error?

Jim

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > vm.marist.edu] On Behalf Of
Hughes, Timothy
Sent: Wednesday, January 18, 2012 11:52 AM
To: ADSM-L < at > vm.marist.edu
Subject: Re: [ADSM-L] Generate backupset error issue

Thanks Jim,

We won't be using a TOC for these however shouldn't a generate backup
command work.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Schneider, Jim
Sent: Wednesday, January 18, 2012 10:36 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

Tim,

Look at the TOCMGmtclass parameter of the 'generate backupset' command.

Jim Schneider

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > vm.marist.edu] On Behalf Of
Hughes, Timothy
Sent: Wednesday, January 18, 2012 9:06 AM
To: ADSM-L < at > vm.marist.edu
Subject: [ADSM-L] Generate backupset error issue

I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever ANR1112W
GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table
of contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance

Thanks Jim,

We won't be using a TOC for these however shouldn't a generate backup command work.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Schneider, Jim
Sent: Wednesday, January 18, 2012 10:36 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

Tim,

Look at the TOCMGmtclass parameter of the 'generate backupset' command.

Jim Schneider

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > vm.marist.edu] On Behalf Of
Hughes, Timothy
Sent: Wednesday, January 18, 2012 9:06 AM
To: ADSM-L < at > vm.marist.edu
Subject: [ADSM-L] Generate backupset error issue

I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever ANR1112W
GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table
of contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance

There are probably other log messages between the start of the command and
the failure message indicating a possible cause of the error.

Regards,
Shawn
________________________________________________
Shawn Drew





Internet
Timothy.Hughes < at > OIT.STATE.NJ.US

Sent by: ADSM-L < at > VM.MARIST.EDU
01/18/2012 12:50 PM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L
cc

Subject
Re: [ADSM-L] Generate backupset error issue






Thanks shaw,

These are emergency backupsets we are running because we can't lose any
data, so were not looking to do a TOC for them now. I just need to create
them for several servers.


Thanks, yes the backup_set_name_prefix was missing from the command. I
finally got the command (below) however the backup set failed

Generate backupset govsrv3x1 Boveofront31Bkup devclass=lto3class
scratch=yes retention=nolimit (SESSION: 1304679)

ANR3503E Generation of backup set for GOVSRV3X1
asBoveofront31Bkup.709804709 (data type File) failed.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Shawn Drew
Sent: Wednesday, January 18, 2012 11:01 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

Look at the copygroup for the node you are trying to create a backupset
for. The error is indicating that the value for "TOC destination" is
empty or invalid. The backupset will still be created, but there won't be
any table of contents. You need to point that to a storage pool. a fast
disk-based one is preferable. (This will need to be read when you browse
the backupset's files in the future)

run "help generate backupset" and go through each parameter. (Your next
email is missing the "backup_set_name_prefix" I think)

Regards,
Shawn
________________________________________________
Shawn Drew





Internet
Timothy.Hughes < at > OIT.STATE.NJ.US

Sent by: ADSM-L < at > VM.MARIST.EDU
01/18/2012 10:06 AM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L
cc

Subject
[ADSM-L] Generate backupset error issue






I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever
ANR1112W GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table of
contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance



This message and any attachments (the "message") is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or
partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that
certain
functions and services for BNP Paribas may be performed by BNP Paribas
RCC, Inc.



This message and any attachments (the "message") is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that certain
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

Thanks shawn,

Yes, I did find some of the following type messages >>> ANR1401W Mount request denied for volume B00013L3 - mountfailed.

Not sure if that was the exact problem that caused the backup set to fail but I finally got it to work.

Thanks again




-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Shawn Drew
Sent: Wednesday, January 18, 2012 2:13 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

There are probably other log messages between the start of the command and
the failure message indicating a possible cause of the error.

Regards,
Shawn
________________________________________________
Shawn Drew





Internet
Timothy.Hughes < at > OIT.STATE.NJ.US

Sent by: ADSM-L < at > VM.MARIST.EDU
01/18/2012 12:50 PM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L
cc

Subject
Re: [ADSM-L] Generate backupset error issue






Thanks shaw,

These are emergency backupsets we are running because we can't lose any
data, so were not looking to do a TOC for them now. I just need to create
them for several servers.


Thanks, yes the backup_set_name_prefix was missing from the command. I
finally got the command (below) however the backup set failed

Generate backupset govsrv3x1 Boveofront31Bkup devclass=lto3class
scratch=yes retention=nolimit (SESSION: 1304679)

ANR3503E Generation of backup set for GOVSRV3X1
asBoveofront31Bkup.709804709 (data type File) failed.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Shawn Drew
Sent: Wednesday, January 18, 2012 11:01 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

Look at the copygroup for the node you are trying to create a backupset
for. The error is indicating that the value for "TOC destination" is
empty or invalid. The backupset will still be created, but there won't be
any table of contents. You need to point that to a storage pool. a fast
disk-based one is preferable. (This will need to be read when you browse
the backupset's files in the future)

run "help generate backupset" and go through each parameter. (Your next
email is missing the "backup_set_name_prefix" I think)

Regards,
Shawn
________________________________________________
Shawn Drew





Internet
Timothy.Hughes < at > OIT.STATE.NJ.US

Sent by: ADSM-L < at > VM.MARIST.EDU
01/18/2012 10:06 AM
Please respond to
ADSM-L < at > VM.MARIST.EDU


To
ADSM-L
cc

Subject
[ADSM-L] Generate backupset error issue






I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever
ANR1112W GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table of
contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance



This message and any attachments (the "message") is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or
partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that
certain
functions and services for BNP Paribas may be performed by BNP Paribas
RCC, Inc.



This message and any attachments (the "message") is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that certain
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

Hi Jim,

Thanks no it didn't work ANR3503E Generation of backup set for GOVSRV3X1 as Beverlysapton3X1BKUP.709804709 (data type File) failed.(SESSION: 1304679, PROCESS: 39951)

I used the following command

GENERATE BACKUPSET govsrv3X1 Beverlysapton3X1BKUP 1 devclass=lto3class scratch=yes retention=nolimit nametype=FSID (SESSION:

I did find several messages like this below (none had the session/process number of the backup set

01/18/12 10:10:18 ANR1401W Mount request denied for volume B00013L3 - mountfailed. (SESSION: 1303875, PROCESS: 39924)


However we restarted the backup set again using the following command (it worked successfully)

generate backupset govsrv3x1 Beverlysapton3X1BKUP devclass=lto3class scratch=yes retention=nolimit

(notice we left off the >>nametype=FSID

Thanks



-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of Schneider, Jim
Sent: Wednesday, January 18, 2012 1:29 PM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

Tim,

The TSM output you posted ended with:
ANS8003I Process number 39922 started.

It looks like it's working. Did you get a subsequent error?

Jim

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > vm.marist.edu] On Behalf Of
Hughes, Timothy
Sent: Wednesday, January 18, 2012 11:52 AM
To: ADSM-L < at > vm.marist.edu
Subject: Re: [ADSM-L] Generate backupset error issue

Thanks Jim,

We won't be using a TOC for these however shouldn't a generate backup
command work.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > VM.MARIST.EDU] On Behalf Of
Schneider, Jim
Sent: Wednesday, January 18, 2012 10:36 AM
To: ADSM-L < at > VM.MARIST.EDU
Subject: Re: Generate backupset error issue

Tim,

Look at the TOCMGmtclass parameter of the 'generate backupset' command.

Jim Schneider

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L < at > vm.marist.edu] On Behalf Of
Hughes, Timothy
Sent: Wednesday, January 18, 2012 9:06 AM
To: ADSM-L < at > vm.marist.edu
Subject: [ADSM-L] Generate backupset error issue

I am trying to generate a backup set for a Windows box and I am getting
the following error, has anyone had this issue?


generate backupset govsrv3X1 govsrv3X1 1 devclass=lto3class
retention=nolimit scratch=yes description=govsrv3X1forever ANR1112W
GENERATE BACKUPSET: No table of contents destination storage pool
available for backup set for node GOVSRV3X1 (data type File). The table
of contents will not be created.
ANS8003I Process number 39922 started.


Thanks in advance