Need Information on Limiting the bandwidth via SLP
Hi Nic,
Thanks for your reply.
I am already through with this doc, but it is not helping me.
Option 1: I put the limitaion under
pd.conf file but that is not working for me, as it was set to
OPTDUP_BANDWIDTH = 3200
But the bandwidth was still not under control & it was utilizing the maximum available to transfer the data over GWAN.
Option 2: I made [b]OPTDUP_BANDWIDTH = 0 and edited the following file:[/b]
Install Path..Program FilesVERITASpddeagent.cfg
# A bandwidth limit, in KiB/sec.
# Value 0 means no limit.
# This setting is used for replication of non-PDDO and PDDO data selections.
# Default value is 0.
# < at > validate [0-9]+
bandwidthlimit=3200
& this also didn't worked properly for me.
So need a proper solution, it may be that I might be missing something, but not sure what.
Warm Regards
Hemant Gambhir
--- On
Fri, 25/5/12, Nic Solomons <Nic.Solomons < at > attenda.net> wrote:
From: Nic Solomons <Nic.Solomons < at > attenda.net>
Subject: Re: [Veritas-bu] Need Information on Limiting the bandwidth via SLP
To: "veritas-bu < at > mailman.eng.auburn.edu" <veritas-bu < at > mailman.eng.auburn.edu>
Date: Friday, 25 May, 2012, 9:05 PM
http://www.symantec.com/business/support/index?page=content&id=HOWTO70618
Cheers,
Nic
From: veritas-bu-bounces < at > mailman.eng.auburn.edu [mailto:veritas-bu-bounces < at > mailman.eng.auburn.edu]
On Behalf Of Hemant Gambhir
Sent: 25 May 2012 15:58
To: veritas-bu < at > mailman.eng.auburn.edu
Subject: [Veritas-bu] Need Information on Limiting the bandwidth via SLP
Hi,
I need one information on the SLP but befre that let me explain my setup.
I've one Master server and under that there are 6 Media Servers. - Total 7 servers
Server Names: Server 1 to Server 6 (All Media Servers)
Server 1 Media server is taking backup of all the clients in the dedupe pool and I've configured SLP and duplication jobs are running on Server 2 & it is happening over WAN to the dedupe pool which is configured on all the media servers.
I want to limit my bandwidth which is used at the time of duplication.
For e.g. I've 100Mbps of link I want to limit the duplication jobs to use only 30 Mbps and at any cost duplication jobs should not exceed this limit.
Can anyone please assist me on the same.
If the scenario is not very clear please let me know what further information is required.
Regards
Hemant Gambhir
The information contained in this e-mail and its attachments is confidential. It is intended only for the named address(es) and may not be disclosed to anyone else without Attenda's consent.
-----Inline Attachment Follows-----
_______________________________________________
Veritas-bu maillist - [url=http://in.mc1932.mail.yahoo.com/mc/compose?to=Veritas-bu < at > mailman.eng.auburn.edu]Veritas-bu < at > mailman.eng.auburn.edu[/url]
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
