We have the LCD which allows you to set the IP if you know the service login, but even that didn't work.
After consoling into the SL500 (38400, 8-N-1 flow - off?) use the command network ip <ip address> to make it take effect. You'll still need the service login for console access.
Use the command network restart to re-initialize the network subsystem.
HTH - Hadrian
-----Original Message-----
From: Steve Bally [mailto:Steve.Bally < at > radisys.com]
Sent: Monday, February 04, 2008 5:39 PM
To: Hadrian Baron; Justin Piszcz; Ed Wilts
Cc: veritas-bu < at > mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Has anyone consoled into an SL500 before?
Unfortunately, this is true, it takes a CE to re-ip the device. I guess
that is why we pay maintenance.
Steve
-----Original Message-----
From: veritas-bu-bounces < at > mailman.eng.auburn.edu
[mailto:veritas-bu-bounces < at > mailman.eng.auburn.edu] On Behalf Of Hadrian
Baron
Sent: Monday, February 04, 2008 9:38 AM
To: 'Justin Piszcz'; Ed Wilts
Cc: veritas-bu < at > mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Has anyone consoled into an SL500 before?
The java application works for either Windows or Solaris.
There is also a lcd panel available for the SL500 which you can
configure IP addresses and other cool stuff if you like new toys, it is
not too expensive.
I am actually in the process of re-iping our SL500 and Sun Support said
I *have* to have an engineer do it. This is because you can only set
the IP address using the "service" account which the install tech's
configured when first setting the thing up. If you know your local
support guy, you might want to give them a call to see if they know the
login/pass.
- Hadrian
-----Original Message-----
From: veritas-bu-bounces < at > mailman.eng.auburn.edu
[mailto:veritas-bu-bounces < at > mailman.eng.auburn.edu] On Behalf Of Justin
Piszcz
Sent: Monday, February 04, 2008 6:17 AM
To: Ed Wilts
Cc: veritas-bu < at > mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Has anyone consoled into an SL500 before?
On Mon, 4 Feb 2008, Ed Wilts wrote:
There is some authentication even for CLI access - I remember reading
that
when we got the instructions to add the slot license upgrade. There
is a
client-side package you can install on Windows - it's a Java app that
communicates with the library over SSL. It requires authentication
with the
library.
What are you trying to accomplish?
.../Ed
On Feb 4, 2008 6:31 AM, Justin Piszcz <jpiszcz < at > lucidpixels.com> wrote:
When you console into an L700 it looks like this:
cli>
Then you type your commands, what does the SL500 look like? Does it
require authentication?
--
Ed Wilts, Mounds View, MN, USA
mailto:ewilts < at > ewilts.org
I found my answer.
On the back of the SL500 there is a public IP port for SLConsole/etc--
I am talking about the CLI/Console port which you connect via serial
cable/or special ethernet cable.
You (I) need to contact Sun/STK to get the initial user/password to
login
via the CLI, then I can configure the public interface and use SLConsole
et all.
Justin.
_______________________________________________
Veritas-bu maillist - Veritas-bu < at > mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu < at > mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu < at > mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
